2024 Catalog
The 2024 Keyser Manufacturing product catalog for all your racing needs!
The 2024 Keyser Manufacturing product catalog for all your racing needs!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TWO-STAGE<br />
STACK SPRING<br />
Spring Slider Kit<br />
Fits the following aluminum<br />
shocks: Piggyback, Canister, Single<br />
Adjustable, Stealth & Avenger<br />
• Kits include slider and stacker nut<br />
Large Body Spring Slider Kit<br />
Fits the following<br />
aluminum shocks:<br />
4-Way, Stealth<br />
II & Aluminum<br />
Twin Tube<br />
• Kits include slider<br />
and stacker nut<br />
SB Stack Spring Kit<br />
• Eliminates spring rattle<br />
on front shocks<br />
• Improves weight transfer to the rear<br />
• Designed for use with 1-7/8” primary<br />
springs and 2-1/4” helper springs It<br />
Stacker Nut<br />
Center Flange Slider<br />
Offset Flange Slider<br />
Note: Does NOT fit Small Body Shocks<br />
Does NOT fit Steel Shocks<br />
Center Flange Kit 310 30548<br />
Offset Flange Kit 310 30549<br />
Center Slider Only 310 30548-1<br />
Offset Slider Only 310 30549-1<br />
Stacker Nut Only (Fits Both Slider Styles) 310 30550-1<br />
Stacker Nut<br />
Offset Flange Slider<br />
Note: Does NOT fit Small Body Shocks<br />
Does NOT fit Steel Shocks<br />
Offset Flange Kit 310 70549<br />
Offset Slider Only 310 70549-1<br />
Stacker Nut Only 310 70550-1<br />
Spring Kit 310 44210<br />
Aluminum Slider Kit<br />
• Made to reduce deflection between springs<br />
when running a stack setup<br />
• Inner nylon sleeve allows reduced drag against a smooth<br />
aluminum body during suspension travel<br />
• Double sided coil-over nut improves spring concentricity Cutouts<br />
allow use of dual spanner wrenches to adjust spring lockout<br />
• Large Acme style thread profile improves adjustment of the springs<br />
• Nylon tip set screw improves hold of coilover<br />
nut to maintain spring curve<br />
Alumium Slider Kit 310 30547<br />
Grip Stack Nut<br />
• Grooves cut into the face of the O.D.<br />
to allow for easier adjustment<br />
• Nylon tipped set screw for better tightening to the shock<br />
body under high frequency loading and unloading cycles<br />
• Slimmer O.D. prevents spring from catching during travel<br />
• Used for both #310 30548 & #310 30549 Kits (Above)<br />
Grip Stack Nut 310 30552<br />
14” SPRING<br />
PRE-LOADER<br />
• Our Spring Pre-Loader allows the ability to run a<br />
soft spring, but pre-load it for higher static load.<br />
• Uses a 14” length, 3” I.D. spring (Sold Separately).<br />
• Anodized to prevent galling<br />
• Fine threaded.<br />
• Will fit all brands of shocks.<br />
• Thrust bearing washer is included.<br />
• Bearing Kit (310 30667)<br />
Spring Pre-Loader 310 30661<br />
Bearing Kit for 14” Spring Preloader<br />
• Bearing Kit made for the<br />
14” Spring Preloader (310 30661)<br />
• Each kit contains:(1) thrust bearing<br />
and (2) washers<br />
Bearing Kit 310 30667<br />
WARNING:<br />
Cancer and Reproductive<br />
Harm<br />
www.P65Warnings.ca.gov<br />
Find Us On<br />
800-472-2464<br />
39
Change language