2024 Catalog

ENGINE
Find Us On
FITTINGS
FUEL/AIR
FILTERS
COOLING/
TANKS
DEGREASERS
& CLEANERS
ELECTRICAL/
GAUGES
DRIVELINE
CHASSIS/
CONSTRUCTION
BODY
COMPONENTS
TOOLS
SAFETY
STEERING
FRONT
SUSPENSION
REAR
SUSPENSION
HUBS &
WHEELS
Axles & Seals
A-E. Standard Axle Tube Seals
• Tube seal helps seal rear end grease from leaving center section
A. For Steel Tube (Fits Tubing Ø 2.650”) 100 8541
B. For Aluminum Tube (Fits Tubing Ø 2.500”) 100 8542
C. Replacement Tube Seal Only 100 8543
D. Replacement O-Ring for 100 8541 (3 needed per seal) 100 8541S
E. Replacement O-Ring for 100 8542 (3 needed per seal) 100 8542S
A-G. Premium Axle Tube Seals
• Tube seal helps seal rear end grease from leaving center section
• Silver seal works in most chromoly tubes
A. Gold Seal for Alum. Tube (Fits Tubing Ø 2.500”) 114 AS9250
B. Blue Seal (Fits Tubing Ø 2.560”) 114 AS9218
C. Red Seal for Steel Tube (Fits Tubing Ø 2.625”) 114 AS9188
D. Silver Seal for Moly Tube (Fits Tubing Ø 2.750”) 114 AS9125
E. Economy Seal (Fits Tubing Ø 2.50-2.75”) 114 EAS1-05
F. Replacement Insert 114 AS1000NP
G. Replacement O-Rings (Silver) 3 Pack 114 AS9125OR3
Solid Axles
• Made from certified Hy-Tuff material
• Heat treated and CNC machined true
• Fits most Quick Change & Ford 9” floaters
• 31-1/2” Long solid axle weighs 10.20 pounds
Length Part #
28-1/2” 100 878067-28.5
29-1/2” 100 878067-29.5
30” 100 878067-30
30-1/2” 100 878067-30.5
31” 100 878067-31
31-1/2” 100 878067-31.5
32” 100 878067-32
32-1/2” 100 878067-32.5
33” 100 878067-33
Gun Drilled Axles
• Made from certified Hy-Tuff material
• Heat treated and CNC machined true
• Fits most Quick Change and Ford 9” floaters
• 31-1/2” Long gun drilled axle weighs 7.60 pounds
• Approximately 2-1/2 pounds in weight savings from solid axles
Length Part #
28-1/2” 100 878067G-28.5
29-1/2” 100 878067G-29.5
30” 100 878067G-30
30-1/2” 100 878067G-30.5
31” 100 878067G-31
31-1/2” 100 878067G-31.5
32” 100 878067G-32
32-1/2” 100 878067G-32.5
33” 100 878067G-33
33-1/2” 100 878067G-33.5
34” 100 878067G-34
Length Part #
33-1/2” 100 878067-33.5
34” 100 878067-34
34-1/2” 100 878067-34.5
35” 100 878067-35
35-1/2” 100 878067-35.5
36” 100 878067-36
36-1/2” 100 878067-36.5
Length Part #
34-1/2” 100 878067G-34.5
35” 100 878067G-35
35-1/2” 100 878067G-35.5
36” 100 878067G-36
36-1/2” 100 878067G-36.5
37” 100 878067G-37
37-1/2” 100 878067G-37.5
38” 100 878067G-38
39” 100 878067G-39
39-1/2” 100 878067G-39.5
40” 100 878067G-40
A. Stock Style Flanged Axle Assembly
• Kit includes retainer, A20 type bearing & lock collar
• A20 bearing is tapered and includes race, seal & sleeve all in one
• Has all 3-bolt patterns: 5 x 4.5”, 5 x 4.75”, & 5x5”
• Drilled for 5/8” press in wheel studs
• Splined end extra long (cut to fit)
28” Splined Flanged Axle Kit 100 8780-28
31” Splined Flanged Axle Kit 100 8780-31
B. Replacement Bearing/Race/Seal/Sleeve
Bearing/Race/Seal/Sleeve, (A20)
C. Rotor Hat
• Lightweight stamped steel, Fits 4.5”, 4.75” or 5” bolt circle, 3” Offset
100 8780-BS
Stamped Steel Rotor Hat 100 365
A B C D E
A
E
2-1/2”
Spline
A
31 Spline 24 Spline
3/8” 3/4”
SOLID AXLES
HOW TO POSITION AXLE BY
USING 3/8” S.A.E.
FINE THREADED BOLTS
1/8” TO 3-16”
1-1/4”
Use grade 8 (minimum) bolt
with jam nut. Install into
opposing ends of axles and
adjust for 1/8” - 3/16” total
clearance with both axle
retaining plates installed.
5.935”
3.066”
B
B C D
F
1.564” (Bearing I.D.)
3.149” (Bearing O.D.)
Included In Assembly:
G
2-1/2”
Spline
Gun drilled on
this end from
top of spline to
end of spline
31 Spline
24 Spline
3/8” 3/4”
GUN DRILLED AXLES
Drilled from spline end
to within 2-1/2” of
opposite end to maintain
strength of the axle.
Less chance of axle twist
or fatigue break than a
fully drilled axle.
Gun drilled axles are used to
reduce rotating weight.
Our axles use Hy-Tuff steel,
designed to withstand
severe and high torque
conditions.
33” Long
C
9-1/4”
Spline
1-1/4”
BRAKES
138
KeyserManufacturing.com
Some parts may contain chemicals known
in the state of California or other states with
similar laws to cause cancer or reproductive
harm.