2024 Catalog

A-B. Black Aluminum Shifter Kits
• Kits come with (1) 16” and (1) 24” shifter rod and heims
A. 2 - Lever Shifter with Lock Kit 100 105000L
B. 2 - Lever Shifter Kit 100 105002K-1
C-D. Replacement Parts
C. 2 - Lever Shifter Only 100 105002-1
D. Shifter Arm 3/8 x 16 threaded hole with .9” slot 100 1051
3/8” Male RH Rod End 167 CM6
3/8” I.D. - 9/16” O.D. RH Steel Jam Nut 100 7024R
15” Rod LH/RH Thread 100 105001-15LR
16” Rod RH/RH Thread 100 105001-16
18” Rod LH/RH Thread 100 105001-18LR
20” Rod RH/RH Thread 100 105001-20
20” Rod LH/RH Thread 100 105001-20LR
24” Rod RH/RH Thread 100 105001-24
30” Rod RH/RH Thread 100 105001-30
36” Rod RH/RH Thread 100 105001-36
*Note Shifter Rods are 3/8” RH Thread
A-B. Longacre Shifter
Knobs and Stick
• Both knobs have 3/8” - 16 threads
• Shifter knobs feature extra drilled holes, and
the ball is mounted with a stainless steel bolt
for cooler shifting and are one piece CNC
machined billet aluminum for light weight
• Shifter stick is CNC machined billet lightweight
aluminum with slotted holes for easy installation
A-C. Extra Long Chevy V-8 Bellhousing Dowel Pins
• Extra long to simplify the task of installing a bellhousing
• Offset dowel pins set screws & locking pins allow alignment of bellhousing
• Two per package
A-F. Pilot Bushings
• Standard bushings are direct replacements in all Chevy V-8s and V-6 engines
• Extra long bushings are for use in all Chevy V-8s and V-6 engines where
midplates increase the distance between the bellhousing and engine
• Self-aligning bearing fits SB GM V-8 and V-6 engines
Shift Boot Cover
• Making adjustments to your shift linkage or taking off the shift lever
for a motor or transmission change is easy with a JOES Shift Boot
• Just unsnap it and you have easy access to the bolts.
• The Carbon X version is made from fire retardant
material with a reflective heat and oil resistant liner.
• Shift Boot Frame Dimensions, 7-1/2” x 5-1/2”.
Warning: Standard version is not fire retardant
Shift Boot Cover
A. 2” Diameter Aluminum Shifter Knob 071 22601
1-5/8” Diameter Aluminum Shifter Knob (not shown) 071 22607
B. 3” Offset Shifter Stick 071 22613
A. Standard, 1.500” Long 085 37932
B. .007 Offset, 1.328” Long 085 37934
C. .014 Offset, 1.328” Long 085 37936
A-B. Chevy Button Replacement Parts
A. Standard Pilot Bushing, 3/4” Tall, Magnetic 100 359PB
B. Standard Pilot Bushing With Bearing, 3/4” Tall, Magnetic 100 359PB-B
C. Extra Long Pilot Bushing, 1” Tall, Non Magnetic 100 360PB
D. Chevy 005 110011
E. Ford with Jerico, T-101 & T-10 or Muncie Transmission 005 110012
F. Chevy Long .250 Engine Plate 005 110013
A
B
DRIVELINE
2-Lever Shifter
Replacement
Bert/ Brinn Fill Kit
• No more spilling oil on your shop floor! This kit
includes everything you need to run the hose
from your ½” NPT plug on the transmission
to the fill can mounted on the deck.
This Fill Kit includes:
• Aluminum Fill Tank
• 3” of -10AN Hose
• ½ NPT to -10AN Fitting
• -10AN 90 degree Fitting
• -10AN Straight Fitting
Bert/Brinn Fill Kit 100 15391
A. Ball Stud Chevy for Mechanical Linkage 005 110005
B. Ball Stud Ford Bellhousing 005 110008
Transmission/Bellhousing Acc.
A
149 16500-BK
A
3/4”
B
A
A
B
B
B
1-1/16”
1-3/8”
D 9/16” E 5/8” F
C
5/8”
C
3/8-16
C
1-1/16”
9/16”
D
.90”
Replacement
Shifter Arm
1”
ENGINE FITTINGS FUEL/AIR
FILTERS
COOLING/
TANKS
DEGREASERS
& CLEANERS
ELECTRICAL/
GAUGES
DRIVELINE CHASSIS/
CONSTRUCTION
BODY
COMPONENTS
TOOLS SAFETY STEERING FRONT
SUSPENSION
REAR
SUSPENSION
HUBS &
WHEELS
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
800-472-2464
149
BRAKES