2024 Catalog

ENGINE
Find Us On
FITTINGS
FUEL/AIR
FILTERS
COOLING/
TANKS
DEGREASERS
& CLEANERS
ELECTRICAL/
GAUGES
DRIVELINE
CHASSIS/
CONSTRUCTION
BODY
COMPONENTS
TOOLS
SAFETY
STEERING
FRONT
SUSPENSION
REAR
SUSPENSION
HUBS &
WHEELS
AQP Stainless Steel Hose
Stainless Steel Braided Hose
The most popular racing hose on the market
for over 60 years - made in the USA!
• Stainless Steel Braid for superior performance
• Compatible with oil, synthetic lubricants, fuels and engine coolants
• Light, flexible and easy to work with
• Stainless steel cover provides durability
• Features a patented AQP elastomer which is resistant to oxidation and ozone
-04 -06 -08 -10 -12 -16 -20
3 Feet 003 FCA0403 003 FCA0603 003 FCA0803 003 FCA1003 003 FCA1203 003 FCA1603 003 FCA2003
6 Feet 003 FCA0406 003 FCA0606 003 FCA0806 003 FCA1006 003 FCA1206 003 FCA1606 003 FCA2006
10 Feet 003 FCA0410 003 FCA0610 003 FCA0810 003 FCA1010 003 FCA1210 003 FCA1610 003 FCA2010
15 Feet - 003 FCA0615 003 FCA0815 003 FCA1015 003 FCA1215 003 FCA1615 -
20 Feet - 003 FCA0620 003 FCA0820 003 FCA1020 003 FCA1220 003 FCA1620 -
I.D. .22” .34” .44” .56” .69” .88” 1.13”
O.D. .44” .55” .65” .80” .94” 1.15” 1.41”
PSI 1000/7501 1000/7501 1000/7501 1000/7501 1000/7501 750/7501 500
Minimum Bend
Radius
2” 2.50” 3.50” 4” 4.50” 5.50” 8.00”
Weight Per Foot .11s .16s .17s .21s .29s .38s .49s
Vacuum Service 21” 21” 21” 28” 28” 28” 21”
CONSTRUCTION: AQP elastomer inner tube, partial stainless steel wire braid & a full stainless steel ourter braid reinforcement.
TEMPERATURE RANGE: Continuous operating temperature from -55° F to +300° F (-49° C to + 150° C).
NOTE: (1) = Hose rating for use with crimp fittings
Startlite Racing Hose
Fire Retardant Startlite Hose
The lightweight alternative...
45% lighter than AQP racing hose - Made in the USA!
Call us for your hose crimping needs!
• Up to 45% lighter in weight than standard Aeroquip assemblies
• Fire retardant *Nomex Hose construction
• Patented AQP ® smooth bore inner tube
• Withstands temperatures up to +300° F.
• Flexible band radius
• Aluminum crimp style swivel fittings and reuseable fittings are interchangeable
-04 -06 -08 -10 -12 -16 -20
Bulk Part 003 FBU0400 003 FBU0600 003 FBU0800 003 FBU1000 003 FBU1200 003 FBU1600 003 FBU2000
I.D. .22” .34” .44” .56” .69” .88” 1.13”
O.D. .44” .55” .65” .80” .94” 1.15” 1.41”
PSI 500 500 500 500 350 350 350
Minimum Bend
2” 2.50” 3.50” 4” 4.50” 5.50” 8.00”
Radius
Weight Per Foot .05s .08s .09s .14s .16s .19s .25s
Vacuum Service 20” 20” 20” 20” 20” 20” 20”
CONSTRUCTION: AQP elastomer inner tube, and Nomex hose construction.
TEMPERATURE RANGE: -45° F to +300° F (-43° C to + 150° C).
Nylon Racing Hose
-8 PREMIUM NYLON HOSE
• Black premium nylon
braded hose
• For use with crimp style
connectors (see page 89)
• Sold Per Foot
Hose I.D. Part #
-8 7/16” 100 43H840008
Manufacturing Co.
Weight Savings
Up to 12 pounds can be saved by using StartLite hose assemblies in lieu of a stainless
steel braided hose assembly on the average circle track car.
Call your Port City salesperson with your hose dimensions (shown below):
Support Coils
Stainless Steel Internal
Support Coils
• Extra support for extreme
vacuum applications
• Call for Buy The Foot pricing
Hose O.D. Length Part #
-12 .73” 20 ft. 003 FBM3413
-16 .94” 20 ft. 003 FBM3414
Manufacturing Co.
Vacuum Service
It is extremely important that you match the hose you are using with
the vacuum rating of your application. If a hose is installed beyond the
minimum bend radius, the vacuum rating will be reduced. Also, if a hose
has been kinked or damaged and then put in vacuum service, the area
that was kinked or damaged will be a weak spot and the vacuum rating
of the hose will be reduced. For severe applications, an internal support
coil may be needed.
BRAKES
90
KeyserManufacturing.com
Some parts may contain chemicals
known in the state of California or other
states with similar laws to cause cancer
or reproductive harm.