Section 3.10: Site Plans and Technical Data - Rick Neufeld Comments

Northern Gateway Pipelines Inc.
Section 3.10: Site Plans and Technical Data
Appendix B: Engineering Standards
• CSA A23.2: Methods of Test and Standard Practices of Concrete;
• CSA A23.3: Design of Concrete Structures;
• CSA A23.4: Precast Concrete – Materials and Construction;
• CSA S6: Canadian Highway Bridge Design Code (CHBDC);
• CSA S16: Limit States Design of Steel Structures;
• CSA W47.1: Certification of Companies for Fusion Welding of Steel Structures;
• CSA W59: Welded Steel Construction (Metal Arc Welding); and,
• National Building Code of Canada (NBCC).
B.4 Topsides Mechanical Design
B.4.1 Mechanical System Design
B.4.1.1 Industry Codes and Standards
• ANSI / API 610: Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
• ASTM A36: American Society for Testing and Materials – Carbon Structural Steel;
• ASTM A307: American Society for Testing and Materials - Standard Specification for Carbon Steel
Bolts and Studs;
• ASTM A234: American Society for Testing and Materials - Standard Specification for Pipe Fittings
of Wrong Carbon Steel and Alloy for Moderate and High Termperature Service;
• ASME B31.3: American Society of Mechanical Engineers – Process Piping;
• ASME B16.5: American Society of Mechanical Engineers – Pipe Flanges and Flange Fittings;
• ANSI B36.10: American Society of Mechanical Engineers – Carbon, Alloy and Stainless Steel
Pipes;
• CSA-G40.20 / G40.21 General Requirements for Rolled or Welded Structural Quality Steel /
Structural Quality Steel;
• CSA-Z245.11 Steel Fittings;
• CSA-Z245.12 Steel Flanges;
• CSA-Z245.15 Steel Valves; and,
• CSA-Z662-03 Oil and Gas Piping Systems.
B.4.1.2 Enbridge Standards
• D02-103: Design Basis, Station and Terminal;
• D02-104: Hazardous Area Classification;
Page B-2 FINAL - Rev. 0 January 20, 2010