Section 3.10: Site Plans and Technical Data - Rick Neufeld Comments

Northern Gateway Pipelines Inc.
Section 3.10: Site Plans and Technical Data
Appendix B: Engineering Standards
B.5.4 Switchgear and MCCs
B.5.4.1 Industry Codes and Standards
• CSA C22.1: Canadian Electrical Code, Part I;
• ANSI C37.12: Specification Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical
Current Basis;
• ANSI C37.16: Preferred Ratings, Related Requirements and Application Recommendations for
Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors;
• ANSI / IEEE 141: Recommended Practice for Electrical Power Distribution for Industrial Plants
(IEEE Red Book);
• ANSI / IEEE C37.010: Application Guide for AC High-Voltage Circuit Breakers Rated on a
Symmetrical Current Basis;
• ANSI / IEEE C37.04: Rating Structure for AC High-Voltage Circuit Breakers Rated on a
Symmetrical Current Basis;
• ANSI / IEEE C37.20.1: Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear;
• ANSI / IEEE C37.20.2: Metal-Clad and Station-Type Cubicle Switchgear;
• ANSI / IEEE C37.100: Definitions for Power Switchgear;
• CSA-C22.2 No. 31: Switchgear Assemblies;
• CSA C22.2 No. 14: Industrial Control Equipment;
• CSA C22.2 No. 190: Capacitors for Power Factor Correction;
• CSA CAN3-C13: Instrument Transformers; and,
• NEMA SG5: Power Switchgear Assemblies.
B.5.4.2 Enbridge Standards
• D10-101: Power System Design;
• D10-102: Substation Design;
• D10-104: Auxiliary Power Supplies;
• D10-105: Power System Protective Relaying;
• D10-201: Wiring Methods;
• D10-202: Grounding Methods;
• D11-102: Variable Frequency Drive; and,
• D10-103: Switchgear and Motor Control Center.
January 20, 2010 FINAL - Rev. 0 Page B-7