Section 3.10: Site Plans and Technical Data - Rick Neufeld Comments

Northern Gateway Pipelines Inc.
Section 3.10: Site Plans and Technical Data
Appendix B: Engineering Standards
• EEMAC 1E-1: Suggested Standard for Future Design - Preferred Locations of Conduit Knockouts
and Openings for Conduit in Enclosed Switches, Enclosed Circuit Breakers, Service Entrance
Equipment and Industrial Control Equipment; and,
• EEMAC M1-6: Motors and Generators.
B.5.8.2 Enbridge Standards
• D02-104: Hazardous Area Classification;
• D06-105: Valve, Steel;
• D09-101: Oil Measurement, Mechanical;
• D10-103: Switchgear and Motor Control Center;
• D10-201: Wiring Methods;
• D12-101: Control, Pump Station;
• D12-102: Control, Injection, and Delivery Facility;
• D12-103: Pressure Control Valve;
• D12-205: Programmable Logic Controllers; and,
• D11-301: Valve Actuation and Control.
B.5.9 Lighting
B.5.9.1 Industry Codes and Standards
• CSA C22.1: Canadian Electrical Code, Part I, Section 30: Installation of Lighting Equipment;
• API RP 500: Recommended Practice for Classification of Locations for Electrical Installation at
Petroleum Facilities;
• IES HB-R: Lighting Handbook (Reference Volume); and,
• IES HB-A: Lighting Handbook (Application Volume).
B.5.9.2 Enbridge Standards
• D02-104: Hazardous Area Classification;
• D11-201: Lighting, Indoor; and,
• D11-202: Lighting, Outdoor.
B.5.10 Hazardous Area Classification
B.5.10.1 Industry Codes and Standards
• CSA-C22.1-94: Canadian Electrical Code Part I;
January 20, 2010 FINAL - Rev. 0 Page B-11