Manual TO3100 - DResearch
Manual TO3100 - DResearch
Manual TO3100 - DResearch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>DResearch</strong> – User manual TeleObserver <strong>TO3100</strong> 2011-02-03<br />
5.2.9 System – Software :: Time<br />
Field Description<br />
Time zone � Select a time zone from the listing.<br />
Time<br />
Update time<br />
(while sending the<br />
configuration)<br />
� The valid properties for that time zone are displayed in the fields below.<br />
� When the configuration is sent the time of the unit is synchronised with that of the<br />
service PC.<br />
External time sync � Periodic synchronization of the time of the device with the time of an external unit.<br />
Synchronization<br />
Source � Choose the source with which the time should be synchronized<br />
Synchronize time all…<br />
hours<br />
� one of the following conditions of eligibility must be met<br />
- a GPS receiver is connected and configured<br />
- the <strong>TO3100</strong> is connected to the IBIS vehicle bus<br />
� Set this intervall parameter to synchronize the time<br />
Maximum difference � Parameter for maximum time difference.<br />
In this dialogue box choose your time<br />
zone and the settings for automatic<br />
time synchronization.<br />
Caution: If you reset the time of<br />
the <strong>TO3100</strong> unit backwards, and<br />
you then save the new<br />
configuration, all the video<br />
footage which is now in the<br />
future according to the new<br />
time, is automatically deleted!<br />
� If this value is reached the system time will synchronized. The system will reboot<br />
after each time synchronization process<br />
44