H51308-v0A Manuale Istruzioni VTNC - Rhoss
H51308-v0A Manuale Istruzioni VTNC - Rhoss
H51308-v0A Manuale Istruzioni VTNC - Rhoss
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION I: USER<br />
I.2 ACCESSORIES AND SPARE PARTS<br />
IMPORTANT!<br />
Only use original spare parts and accessories.<br />
RHOSS S.p.a. shall not be held liable for damage<br />
caused by tampering or work carried out by<br />
unauthorised personnel or malfunctions caused by<br />
the use of non-original spare parts or accessories.<br />
IMPORTANT!<br />
In places where the water is particularly hard, it is<br />
advisable to use a water softener.<br />
I.2.3<br />
CONTROLS SUPPLIED AS STANDARD<br />
• Remote control<br />
Remote control complete with batteries. For instructions, please refer to<br />
paragraph I.3.1<br />
I.2.1<br />
ACCESSORIES AND SPARE PARTS<br />
SUPPLIED AS STANDARD<br />
VA - Auxiliary condensation collection tray.<br />
For models 25-30-50<br />
For models 60-85<br />
(Dimensions 60 x 165 x 18 mm)<br />
I.2.4 CONTROLS SUPPLIED LOOSE<br />
• KPF<br />
Wired control panel with LCD display and 10 keys, for the manual<br />
regulation of all the appliance functions on the basis of the selected<br />
ambient temperature. The panel is designed to be wall-mounted.<br />
For instructions on how to install and use the control panel, please refer<br />
to the instructions for use provided with the same.<br />
I.2.2<br />
ACCESSORIES AND SPARE PARTS<br />
SUPPLIED LOOSE<br />
KV3 - 3-ways solenoid valve for 2-pipe-systems (auxiliary condensation<br />
collection tray supplied as standard on every unit).<br />
Models 25-30-50 (¾” –30 Nm)<br />
(Dimensions 120 x 120 x 18 mm)<br />
Models 60-85 (¾” – 30 Nm)<br />
I.3 INSTRUCTIONS FOR USE<br />
The following operations can be carried out using the remote control<br />
and/or the wired control panel (KPF) see the instructions for use<br />
provided with the same):<br />
• Switching the unit on/off.<br />
• Selection of the three fan speeds.<br />
• Adjusting the thermostat and maintaining the desired ambient<br />
temperature.<br />
• Switching between the cooling/heating operating cycle.<br />
The unit panel houses a number of indicators which provide<br />
information on the unit status or alarm signals. If the remote control<br />
and/or control panel (KPF) are temporarily unavailable, they can be<br />
used to operate the unit in manual mode using the MANUAL key.<br />
KMC - Forced condensation drainage micro-pump.<br />
KCB – Outlet mouth closure (only for models 60-85).<br />
29