H51308-v0A Manuale Istruzioni VTNC - Rhoss

SECTION II: INSTALLATION AND MAINTENANCE
Example of fixture to a wooden structure:
1
4
2
3
4
1 Nut
2 Wooden structure
3 Threaded brace
4 Washer
5
3 3
5
1
1
6
VTNC
6
Once you have installed the four braces, tighten the nuts without locking
them, and insert the washers as illustrated in the figure:
Level the unit using a spirit level and adjusting the nuts and lock nuts on
the threaded braces, keeping a distances of 25÷30 mm between the
body of the unit and the inner surface of the false ceiling.
3
6
1
VTNC
5
4
5
9
2
1
3
4
1
1 Nut
2 Space for hanging bracket
3 Threaded brace
4 Washer
5 T-section
Position the connection pipes in advance, as described in paragraph
II.2.5. Lift the unit carefully (without the frame), holding it by the four
brackets (or the four corners) and place it in the false ceiling.
3 Threaded brace
6 Hanging bracket
8 False ceiling
9 Spirit level
Replace the T-section (if it had been removed). Align the unit with the T-
sections, tightening the nuts and lock nuts.
8
3 3
5
5
6 6
7
VTNC
3 Threaded brace
5 T-section
6 Hanging bracket
7 Water connections
If it is not possible to remove a T-section, it will be necessary to tilt the
unit (this operation can only be carried out if the false ceiling is over 300
mm high).
3 3
6
6
5
VTNC
5
Lastly, after having made the water and condensation drain
connections, make sure that the unit is still level.
39