Instruction Book DC2010 - Janome

QuiltingMachine settingq Patternw LED displaye Footr Quilting barA: Zigzag footq w erLoosen the quilting bar screw on the back of the footholder and insert the quilting bar into the hole. Set thequilting bar at the desired position and tighten thescrew to secure it.Sew tracing the previous seam with the quilting bar tokeep constant seam spacing.q Quilting bar screww Holee Quilting barr Seam spacingqwerPin TuckingMachine settingq Patternw LED displaye FootG: Blind hem footq w eFold the fabric with wrong side together.Position the fabric so that the needle pierces 0.1–0.2cm (1/16") inside of the folded edge, and lower thefoot.Turn the guide screw and move the guide next to thefolded edge. Sew guiding the folded edge along theguide.Open the fabric and press the tucks to one side.q Guide screww Guidee Folded edgeqwe72