ProMatic - Hormann.fr

ENGLISHService renderedFor the duration of the guarantee we will eliminate allproduct defects that are proven to be attributable tomaterial or manufacturing faults. We pledge to providefree of charge and at our discretion to replace the defectiveparts with a non-defective one, to improve it, orto reimburse for a reduction in price.Excluded are damages due to:- improper fitting and connection- improper commissioning or operating- external influences, such as fire, water, abnormalweather conditions- mechanical damage due to accidents, dropping, jolting- negligent or deliberate destruction- normal wear and tear or deficient maintenance- repair by non-qualified persons- use of non-original parts- removal or making unrecognisable the serial numberReplaced parts become our property.Quick release:- Photocell or closing edge safetydevice can be connected- Options relay for warning light,additional external lightingIn the event of a power failure,actuated from the inside via apull cordRemote control: 2-button hand transmitter HS 2and separate receiver.Universal fitting:Door speed:Airborne noiseemission Garagedoor operator:For up-and-over and sectionaldoorsApprox. 14 cm/s (dependingon size and weight of door)≤ 70 dB (A)5 Technical DataPower supply:230/240 V, 50/60 Hzstandby approx. 4,5 WBoom:Extremely flat (no more than30 mm) with integral door securitykit and maintenance-free,patented toothed belt withautomatic belt tensioning.Protection category:Automatic cut-out:End-of-travelcut-out/Force limit:Rated load:Push and pull force:For dry rooms onlyAutomatically programmedseparately for both operationaldirections.Self-learning, non-wearing, sinceno mechanical switches areused. Additionally integratedexcess travel stop of approx.45 s. Automatic cut-out readjustsitself during each travelcycle.150 N500 NApplication:Exclusively for garages in thedomestic sector. For easy-movingup-and-over and sectional doorswith a door area of up to 10 m 2Not suitable for industrial /commercial use.Parking spaces: Suitable for a maximum of 2parking spacesShort-time peak load: 650 NMotor:Transformer:Connection:Special functions:DC motor with "Hall" sensorWith thermal overload protectionConnection technique withoutscrews for external equipmentwith safe low voltage of 24 V DC,e.g. internal and external buttonsfor impulse control.- Operator lighting, 3 minuteslight factory setting- STOP/OFF switch can beconnected44 06.2004 TR10A014 RE