RBC30SES / RBC30SBS - Ryobi

More documents

Recommendations

Info

F GB D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG FILLING THE TANK ■ Clean surface around fuel cap to prevent contamination. ■ Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap. ■ Carefully pour fuel mixture into the tank. Avoid spillage. ■ Prior to replacing the fuel cap, clean and inspect the gasket. ■ Immediately replace fuel cap and hand tighten. Wipe upany fuel spillage. Move 9 m away from refueling site before starting engine. Note: It is normal for smoke to be emitted from a new engine during and after first use. WARNING Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 9 m from refueling site before starting engine. Do not smoke! 1 Litre 2 Litres 3 Litres 4 Litres + + + + 20 ml 40 ml 60 ml 80 ml = } = = 50:1 (2%) = 5 Litres + 100 ml = STARTING AND STOPPING (Fig. 4a - 4b) WARNING Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. NOTE: Be sure to return the stop switch to the "I" (RUN) position before trying to start unit. OPERATING THE TRIMMER (Fig. 5) RBC30SES : Hold the trimmer with the right hand on the rear handle and the left hand on the front handle. RBC30SBS: Hold the trimmer with the right hand on the trigger handle and the left hand on the left handle. Keep a firm grip with both hands while in operation. Trimmer should be held at a comfortable position with the trigger handle about hip height. Always operate trimmer at full throttle. Cut tall grass from the top down. This will prevent grass from wrapping around the shaft housing and string head which may English 17 cause damage from overheating. If grass becomes wrapped around the string head, stop the engine, disconnect the spark plug wire, and remove the grass. Prolonged cutting at partial throttle will result in lubricant dripping from the silencer. CUTTING TIPS (Fig. 6) ADVANCING THE LINE (Fig. 7) For Reel EasyTM Only OPERATING THE BRUSHCUTTER (Fig. 5) RBC30SES: Hold the brushcutter with the right hand on the rear handle and the left hand on the front handle. RBC30SBS: Hold the brushcutter with the right hand on the trigger handle and the left hand on the left handle. Keep a firm grip with both hands while in operation. Brushcutter should be held at a comfortable position with the trigger handle about hip height. Maintain your grip and balance on both feet. Position yourself so that you will not be drawn off balance by the kick-back reaction of the cutting blade. Adjust the shoulder strap to position the brushcutter at a comfortable operating position and to assure that the shoulder strap will reduce the risk of operator contact with the blade. Exercise extreme caution when using the blade with this unit. Blade thrust is the reaction which may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant, and suddenly “thrust” the unit away from the object that was hit. This reaction can be violent enough to cause the operator to lose control of the unit. Blade thrust may occur without warning if the blade snags, stalls or binds. This is more likely to occur in areas where it is difficult to see the material being cut. For cutting ease and safety, approach the weeds being cut from the right to the left. In the event that an unexpected object or woody stock is encountered, this could minimise the blade thrust reaction. CUTTING TECHNIQUE - BLADE (Fig. 8) WARNING Extreme care must be taken when using blades to ensure safe operation. Read the safety information for safe operation using the blade, refer to “Specific Safety Rules for Brushcutter and Blade Use” earlier in this manual. 960643004-02.indd 17 12/13/03 2:27:53 PM
F GB D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG MAINTENANCE WARNING Use only original manufacturer's replacement parts, accessories and attachments. Failure to do so can cause possible injury, poor performance and may void your warranty. ■ The cutting attachment must not work in idle mode. If this requirement is not satisfied, the clutch has to be adjusted or the machine needs an urgent maintenance by a qualified technician. ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorized service agent. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black lubricant residue dripping from the muffler. ■ Make sure all guards, straps, deflectors and handles are properly and securely attached to avoid the risk of personal injury. STRING REPLACEMENT (Fig. 9) For Reel EasyTM Only BLADE PROTECTOR (Fig. 10) CLEANING THE EXHAUST PORT AND MUFFLER Depending on the type of fuel used, the type and amount of lubricant used, and/or your operating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice a power loss with your petrol powered tool, a qualified service technician will need to remove these deposits to restore performance. SPARK ARRESTOR The spark arrestor must be cleaned or replaced every 25 hours or yearly to ensure proper performance of your product. Spark arrestors may be in different locations depending on the model purchased. Please contact your nearest service dealer for the location of the spark arrestor for your model. ATTACHING THE STORAGE HANGER (Fig. 11) CLEANING THE AIR FILTER SCREEN (Fig. 12) FUEL CAP WARNING A leaking fuel cap is a fire hazard and must be replaced immediately. English 18 SPARKING PLUG (Fig. 13) This engine uses a Champion RCJ-6Y or equivalent spark plug with 0.63 mm electrode gap. Use an exact replacement and replace annually. STORAGE (1 MONTH OR LONGER) ■ Drain all fuel from tank into a container approved for fuel. Run engine until it stops. ■ Clean all foreign material from the trimmer. Store it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. ■ Abide by all ISO and local regulations for the safe storage and handling of fuel. Excess fuel should be used up in other 2-stroke engine powered equipment. 960643004-02.indd 18 12/13/03 2:27:53 PM
Page 1 and 2: RBC30SES / RBC30SBS F COUPE-BORDURE
Page 3 and 4: Sous réserve de modifications tech
Page 5 and 6: F GB D E I P NL S DK N FIN GR HU CZ
Page 19: F GB D E I P NL S DK N FIN GR HU CZ
Page 71 and 72:
F GB D E I P NL S DK N FIN GR HU CZ
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
GR F GB D E I P NL S DK N FIN HU CZ
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
F GARANTIE - CONDITIONS Ce produit
Page 245 and 246:
H A GARANCIA FELTÉTELEI Ezt a Ryob
Page 247 and 248:
BG ÉÄêÄçñàü - ìëãéÇà
Page 249 and 250:
I P DICHIARAZIONE DI CONFORMITÀ CE
Page 251 and 252:
HU CZ EK MEGFELELŐSÉGI NYILATKOZA
Page 253 and 254:
EST VASTAVUSDEKLARATSIOON Me kinnit
Page 255:
RYOBI TECHNOLOGIES (UK) LIMITED. Me
show all

RBC30SES / RBC30SBS - Ryobi

Create successful ePaper yourself

Delete template?

Save as template?