Endbericht - Haus der Zukunft

Abbildung 116: “BuildOpt_VIE” building model.9.5.5 Occupants and equipment operationThe occupancy density was determined by interviewing all office workers. Daily workpatterns on a room by room basis were documented along with the electrical equipmentin use. All the equipment on-site was logged with their energy consumptionsand reproduced in the simulation. The table below shows an example of the officeequipment energy load.Tabelle 56: office equipement energy loadThe required workplace illumination during occupancy was simulated using 500 lux,following the specifications in DIN 18599 or EN 12464-1.The mean presence probability of the office building is about 30 %, see following picture.This is a result of the high number of part-time employees.222