Bedienungsanleitung KXE - REITZ Ventilatoren

3.7.7 Electric connection conditions
3.7.7.1 Earthing
BWA-KXE-Fetteinzelstehlager_englisch_02.doc
Transport, Installation
Connect the power supply lead according to the
valid regulations of the local electric supply company
and observe in addition:
- the EN DIN VDE-regulations (e.g. Germany),
- the safety regulations,
- the regulations for the prevention of accidents.
As far as the low-voltage line is concerned, use for example
- earthing wire acc. DIN VDE 0255,
- plastic cable acc. DIN VDE 0273,
- cable lugs acc. DIN 46235
- terminal screws
and observe the instructions of the cable and sealing end
manufacturers.
The cross section of the power supply lead depends on the
type of cabling, rated voltage and rated power of the machine.
Cable ends with pressed-on cable lugs must be arranged
and connected in accordance with the connecting plan that is
to be found in the terminal box cover.
The power supply lead and the cable ends must not exert
any lateral and/or torsional power on the terminal studs during
or after the cable connecting work.
In case the fan is provided with electric protection devices
(e.g. position switch), adhere to the instructions of DIN EN
60204-1 Safety of machinery – Electrical equipment of machines.
If the fan and/or its equipment are provided with earthing
clamps, connect the system’s earthing to them.
Figure 6
Figure 6 � earthing link
3.17