Bedienungsanleitung KXE - REITZ Ventilatoren

More documents

Recommendations

Info

8.3 Spare parts BWA-<strong>KXE</strong>-Fetteinzelstehlager_englisch_02.doc When ordering spare parts, specify - the exact name of the structural components - the type of machine and - the serial number. Repair work The spare parts list (see enclosure) is a document separately attached to this operating manual. The clearly arranged list comprises all main spare parts for the fan with exact description of the parts. Type of machine and serial number are shown on the name plate. If required, send the manufacturer a sample of the part to be exchanged. 8.2
9. Annex 9.1 Additional technical information 9.1.1 Tightening moments for fastening screws BWA-<strong>KXE</strong>-Fetteinzelstehlager_englisch_02.doc Annex Unless otherwise stated, use the following tightening moments for connections with fastening screws and fastening nuts: Data in Newton metre (Nm). screws property class 8.8 screws property class 10.9 M6 10 14 M8 25 35 M10 49 69 M12 86 120 M16 210 295 M20 410 580 M24 710 1000 M27 1050 1500 M30 1450 2000 M36 2400 3555 When installing the fan, reduce the tightening moments by 10% so that the screw is not tightened to its yield point. Values for set screws with metric coarse pitch thread bases upon German Standard VDI2230 with a coefficient of frictions are µ ges = µ K = µ G = 0,12. The tightening moments refer to slightly oiled screws and nuts. 9.1
Page 1 and 2:
Translation of the Original instruc
Page 3 and 4:
Table of contents Table of contents
Page 5 and 6:
BWA-KXE-Fetteinzelstehlager_englisc
Page 7 and 8:
1.3 Description 1.4 Intended use BW
Page 9 and 10: 1.6 General remarks BWA-KXE-Fettein
Page 11 and 12: 1.7 Nameplate BWA-KXE-Fetteinzelste
Page 13 and 14: 2.3 Symbols BWA-KXE-Fetteinzelstehl
Page 15 and 16: 2.4 Safety regulations BWA-KXE-Fett
Page 17 and 18: 2.6 Electric connection conditions
Page 19 and 20: 2.9 Personal protective equipment B
Page 21 and 22: 3. Transport, Installation 3.1 Gene
Page 23 and 24: BWA-KXE-Fetteinzelstehlager_englisc
Page 25 and 26: 3.5 Transport BWA-KXE-Fetteinzelste
Page 27 and 28: 3.6 Installation BWA-KXE-Fetteinzel
Page 29 and 30: 3.6.4 Mounting and Alignment 3.6.4.
Page 31 and 32: 3.6.4.3 Alignment of the shafts Fig
Page 35 and 36: 3.7.3 Ducting of fan 3.7.4 Check of
Page 37 and 38: 3.7.7 Electric connection condition
Page 39 and 40: 3.7.9 Seal connection BWA-KXE-Fette
Page 41 and 42: 4.3.2 Check of sense of rotation
Page 43 and 44: 4.4.3 Switching on of the fan BWA-K
Page 45 and 46: 5. Operation, Operating 5.1 General
Page 47 and 48: 6.3 Troubles BWA-KXE-Fetteinzelsteh
Page 49 and 50: 7. Maintenance BWA-KXE-Fetteinzelst
Page 51 and 52: 7.3.1.1 Lubrication instructions an
Page 53 and 54: 7.4 Shaft seal 7.4.1 Standard seal
Page 55 and 56: 7.5 Coupling 7.5.1 Alignment Figure
Page 57 and 58: 7.9 Maintenance schedule BWA-KXE-Fe
Page 59: 8. Repair work 8.1 General remarks
Page 63 and 64: 9.1.3 Limiting values bearing tempe
Page 65 and 66: 10. Fan shutdown 10.1 General remar
Page 67 and 68: 10.4 Measures in case of recommissi
show all

Bedienungsanleitung KXE - REITZ Ventilatoren

Create successful ePaper yourself

Delete template?

Save as template?