Bedienungsanleitung KXE - REITZ Ventilatoren

8. Repair work
8.1 General remarks � Prior to removal / installation of spare parts, as:
8.2 Safety instructions
BWA-KXE-Fetteinzelstehlager_englisch_02.doc
Repair work
- impeller,
- motor bearings,
- sealing rings,
- coupling inserts,
- motor,
prepare everything to ensure smooth and faultless working
processes.
� Use appropriate removal / installation devices, tools and
heating devices for the anti-friction bearings.
� The working place for the removal of the parts must be
kept clean.
� Install only spare parts recommended and/or delivered by
the manufacturer. The special installation instructions
must be observed. These instructions are not part of this
operating manual and are to be requested from Konrad
Reitz Ventilatoren GmbH & Co. KG as separate documents.
Repair work that has been carried out during the warranty
without our prior written agreement of the manufacturer,
leads to the extinction of all guarantee rights.
Recommendation:
If repair works are required, request the service specialists
of the manufacturer:
Carry out maintenance works at standstill of the fan
only.
Ensure that the fan is secured against restart and
marked by a corresponding information sign.
Observe the safety instructions and the regulations
for prevention of accidents.
8.1