Manual - OMSI - Omnibus simulator

While testing the controls, you can also have a look at your virtual feet
– if the controls are working correctly, you’ll be able to see the pedal
positions change!
When you’re ready to drive, put the transmission in gear (gear selector
button “3”, or [D] on the keyboard) and release the parking brake
with [.]. Choose whatever route you’d like and get used to the
controls. If you get into trouble, you can click on in the menu to
return the bus to a preset position.
2.10. First Aid
If you happen to get your bus stuck somewhere, you can put in
reverse and back it out. Press [N] to put it in neutral and then [R] to
put it in reverse. To put it back into drive, you’ll have to first put it in
neutral [N] again.
If you collide with another vehicle, you’ll have to stop and activate the
emergency lights by pressing [B]. Then open the menu by pressing [Alt]
and call the police , who will respond to the accident and secure
the victim. If you don’t do this, you’ll be charged with leaving the
scene of an accident.
Collisions with other vehicles, objects or buildings can damage your
vehicle. After an accident, the electrical system may be damaged or
the transmission could be shot. You can repair damage and continue
driving by opening the menu and selecting .
2.11. Your First Passenger
Are you ready? Then it’s time to pick up your first passenger! Open the
menu and click on to return to the starting position at Nordspitze
Bauernhof, or drive there yourself if you know the way. Set the clock
in the menu to 10:05.
33