Power Cable Accessories
Power Cable Accessories
Power Cable Accessories
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
EKM 1261 – Connection Box for Lighting Application<br />
Pole Diameter t 100 mm and Outdoor Application, Fuses: DII (E27), Earth <strong>Cable</strong>s d 16 mm 2<br />
Application<br />
This connection box is intended to be<br />
installed for outdoor application and<br />
inside of lighting columns at the<br />
connection between looped-through earth<br />
cables and the luminaire components<br />
protected by fuses.<br />
Selection Criteria<br />
• For application inside of lighting<br />
columns<br />
Pole diameter: t 100 mm<br />
Door size: t 80 x 250 mm<br />
• 4 or 5 mantle terminals for<br />
2 cables 6–16 mm 2<br />
• Fuses D II (E27) up to 25 A<br />
Technical Data<br />
• Acc. IEC 60439-1<br />
• Impact resistant thermoplastic<br />
• All metal parts corrosion protected<br />
• Transparent fuse cover<br />
• Ingress Protection: IP 54<br />
• Class of Protection II<br />
• Entry for earth cables<br />
max. ‡ 22 mm (2x)<br />
without insert max. ‡ 25 mm (2x)<br />
• Crompression sealing glands for<br />
luminaire cables:<br />
‡ 8–14 mm luminaire cable<br />
(2 glands for 2 luminaire cables<br />
3 x 1,5 mm 2 –5 x 2,5 mm 2 )<br />
Fuse sockets Cross section (mm2 ) Ordering description<br />
for 1 and 2 cables for 3 cables<br />
1 x DII (E27) 4 x 6–16 – EKM 1261-1D2-4-16<br />
1 x DII (E27) 5 x 6–16 – EKM 1261-1D2-5-16<br />
2 x DII (E27) 4 x 6–16 – EKM 1261-2D2-4-16<br />
2 x DII (E27) 5 x 6–16 – EKM 1261-2D2-5-16<br />
2 x DII (E27) 5 x 10** 5 x 10 EKM 1261-2D2-5-10<br />
none, DIN-rail * 5 x 6–16 – EKM 1261-0D0-5-16-1R<br />
* Connector block only and DIN-rail for up to 3 MCB<br />
** only for 2 cables<br />
Note: Fuses, adapter screws and screw caps not included. <strong>Accessories</strong> and spare parts see page 121 and 122<br />
Boxes without fuse sockets are available on request.<br />
1 1 7