Power Cable Accessories

Indoor termination for unscreened, 3-core polymeric insulated cables 6 kV and 10 kV
Cable
The indoor termination is designed for 6 kV
and 10 kV unscreened three core plastic
insulated cables with armour or copper
earth shield.
For example: АПВГ, YAKYFtly, YKYFoY,
YAKYFpy, AYKCY, CYKCY, NAYFGY, PP
41-(A), PP 44-(A), PP45-(A), N(A)YFGY.
2 6
Dimension L see table
Design of termination
The cores are covered with non-tracking
insulating tubing. The area between the
end of the oversheath and the cores is
sealed and protected by a non-tracking
insulating breakout. Solderless earth
connections can be ordered separately
Nominal voltage Cross section Ordering description Dimension (mm)
Uo/U (kV) (mm2 ) L
EPKT 2041 450
16– 50
EPKT 2042
EPKT 2043
650
800
EPKT 2044 1200
3,5/6 EPKT 2051 450
and
6/10
70–120
EPKT 2052
EPKT 2053
650
800
EPKT 2054 1200
EPKT 2061 450
150–240
EPKT 2062
EPKT 2063
650
800
EPKT 2064 1200
Note: One termination kit includes material for 3 phases.
The core lengths can be reduced to the requirements at the place of installation, the minimum core length is 250 mm
(450 mm for 10 kV).
Solderless earth connection for cables with armour or copper tape shield
Nominal voltage Cross section Ordering description
Uo/U (kV) (mm2 )
3,5/6
16– 95
120–300
SMOE 60805
SMOE 60873
16 SMOE 60805
6/10 25– 95 SMOE 60873
120–300 SMOE 62176
Note: The solderless earth connection kit must be ordered separately. It includes a roll spring and an earth lead.
Terminations for motor connection boxes are available on request.
L