Power Cable Accessories

Outdoor terminations for flexible, screened, rubber insulated cables 6 kV
Cable
The termination is designed for 6 kV
screened, flexible, rubber insulated cables
with one or three earth cores.
For example: NTSC, КГЭ, КГЭТ, Ogb,
Ogc-G, CHCU, CBVU, EpN 64i65, EpN
(BN) 64i74, EpN (BN) 76i78, EpN (BN)
78/53.
Design of termination
Stress grading mastic is wrapped around
the area of the screen cut. All cores are
covered with non-tracking insulating tubing.
The area between the end of the
oversheath and the cores is sealed and
protected by a 6- or 4-finger breakout.
Outdoor terminations include in addition 2
sheds per phase. The cores remain flexible
and can be bent like the cable.
Nominal voltage Cross section Ordering description by length D No. of
Uo/U (kV) (mm2 )
Cables with 1 earth core
L = 450 mm L = 1200 mm (mm) skirts
10/10– 70/ 70 EMKT 7A4OH2 EMKT 7A4OH5 76 3 x 2
3,5/6
95/95–185/185
Cables with 3 earth cores
EMKT 7B4OH2 EMKT 7B4OH5 85 3 x 2
25/10– 70/16 EMKT 7E6OH2 EMKT 7E6OH5 76 3 x 2
95/16–185/35 EMKT 7F6OH2 EMKT 7F6OH5 85 3 x 2
Note: One termination kit includes material for 3 phases. Longitudinally sealed cable lugs are to be used.
The core lengths can be reduced to the requirements at the place of installation, the minimum core length is 450 mm.
Terminations for other voltages or core lengths are available on request.
L
Dimension L, D see table
D
2 5