Power Cable Accessories

EKM 1281 – Connection Box for Lighting Application
Pole Diameter t 120 mm and Outdoor Application, Fuses: DII (E27), Earth Cables d 35 mm 2
Application
This connection box is intended to be
installed for outdoor application and
inside of lighting columns at the
connection between looped-through earth
cables and the luminaire components
protected by fuses.
Additional connection boxes for other
cable dimensions, fuses or accessories
are available on request.
Selection Criteria
• For application inside of lighting
columns
Pole diameter: t 120 mm
Door size: t 100 x 300 mm
• 4 or 5 mantle terminals for
2 cables 16–25 mm 2 or
2 cables 16–35 mm 2
• Fuses D II (E27) up to 25 A
Technical Data
• Acc. IEC 60439-1
• Impact resistant thermoplastic
• All metal parts corrosion protected
• Ingress Protection: IP 54
• Class of Protection II
• Entry for earth cables
‡ 22–30 mm (2x)
• Crompression sealing glands for
luminaire cables:
‡ 8–14 mm luminaire cable
(2 glands for 2 luminaire cables
3 x 1,5 mm 2 –5 x 2,5 mm 2 )
Fuse sockets Cross section (mm2 ) Ordering description
for 1 cables for 2 cables for 3 cables
1 x DII (E 27) 5 x 25 5 x 16–25 – EKM 1281-1D2-5-25
2 x DII (E 27) 4 x 25 4 x 16–25 – EKM 1281-2D2-4-25
2 x DII (E 27) 4 x 35 4 x 16–35 – EKM 1281-2D2-4-35
2 x DII (E 27) 5 x 25 5 x 16 5 x 16 EKM 1281-2D2-5-16
2 x DII (E 27) 5 x 25 5 x 16–25 – EKM 1281-2D2-5-25
none, DIN-rail* 4 x 35 4 x 16–25 – EKM 1281-0D0-4-25-1R
* Connector block only and DIN-rail for up to 3 MCB
Note: Fuses, adapter screws and screw caps not included. Accessories and spare parts see page 121 and 122
Boxes without fuse sockets are available on request.
1 1 9