Hot Rolled Asphalt and Asphalt Concrete (Macadam) - Ministry of ...

Glossary of Technical Terms
Added Filler Filler aggregate that is additional to that
inherent in the course and fine aggregate
Aggregate / Cement
Ratio
The ratio between the total mass of
aggregate, including the mass of any
absorbed water, in a concrete mix and the
mass of cement in the mix.
Asphalt A mixture of coarse and fine aggregate, filler
aggregate and bituminous binder used in the
construction of flexible pavements for roads
and airfields.
Asphalt Concrete An asphalt mixture consisting of continuous
graded aggregate, filler aggregate and
bituminous binder proportioned to produce a
dense and impermeable surfacing.
Asphalt Surfacing A porous friction course, surface course, or a
combination of these, and a binder course.
Asphaltic Concrete Alternative name for ‘Asphalt Concrete’.
Base Structural layer(s) of a pavement immediately
below the Binder Course that are bound.
Basecourse Previous name for ‘Binder Course’.
Bay (of Concrete) The area of slab bounded by adjacent pairs of
longitudinal and transverse joints or grooves.
Bay Layout The pattern of joints and grooves on a
concrete pavement.
Binder A material used for the purpose of holding
solid particles together as a coherent mass.
Binder Course The layer or layers of the asphalt surfacing
immediately below the surface course.
(Previously called ‘Basecourse’).
Bitumen Binder obtained from crude oil by refinery
processes.
Bitumen Emulsion An emulsion in which bitumen is dispersed in
water or in aqueous solution with the aid of
suitable emulsifying agents.
Bitumen Macadam See ‘Macadam’.
July 2010 iii