Config Panel - Guntermann und Drunck GmbH

Monitoring functions
Monitoring functions
The current monitoring values of all devices within the KVM system can be viewed in
the device-specific branches (e.g. KVM matrix systems) as well as in the KVM Combinations
and Critical Devices branches of the tree view.
The various information regarding a device can either be displayed in individual values
or in monitoring groups, which are sorted according to topic. The following
exemplary figure shows the Status values and three different monitoring groups:
Figure 2: Detailed view of an exemplary monitoring table
Individual values (the Status value in the figure above) immediately show if the status is
correct (green) or deviating from the normal operating value (red). The text in the column
also provides information about the current status.
Monitoring groups allow you to group various individual values. The column of a
monitoring group shows if all values are within range (OK) or if at least one value is
deviating from the normal operating values (Error).
Clicking the arrow in the column opens a separate window, which displays the individual
values of the group.
Dynamic-UserCenter 32 · 34