Config Panel - Guntermann und Drunck GmbH

Basic configuration of the web application
Filter rule: Drop: Data packets whose sender information comply with
the IP address or MAC address are not processed.
Accept: Data packets whose sender information comply
with the IP address or MAC address are processed.
5. Click Change to save the changed data.
6. Click OK to close the window.
Deleting existing netfilter rules
How to delete existing netfilter rules:
1. Click the tools symbol in the toolbar.
2. Click the Network > Interfaces > Netfilter tabs.
3. Mark the rule to be deleted in the list of the existing netfilter rules.
4. Click Remove.
5. Confirm the confirmation prompt by pressing Yes or cancel the process by clicking
No.
6. Click OK to close the window.
Changing the order/priority of existing netfilter rules
The netfilter rules are processed in the order they are stored. If a rule does apply, the
respective action is carried out and all following rules are ignored.
IMPORTANT: Please mind the order or priority of the single rules, especially when
adding new rules.
How to change the order/priority of existing netfilter rules:
1. Click the tools symbol in the toolbar.
2. Click the Network > Interfaces > Netfilter tabs.
3. Mark the rule whose order/priority is to be changed in the list of the existing netfilter
rules.
4. Click the button (arrow up) to increase the priority or the button (arrow down)
to decrease the priority.
5. Click OK to close the window.
19 · Dynamic-UserCenter 32