Config Panel - Guntermann und Drunck GmbH

Monitoring functions
Selecting a monitoring set in the folder configuration
After a monitoring set has been created, it can be activated in the configuration of
one (or more) folders of the tree view.
How to activate a monitoring set:
1. Right-click the KVM combinations branch in the tree view.
2. Click the Configuration entry in the context menu.
3. Use the Monitoring set entry to select the desired set.
IMPORTANT: The created monitoring sets are only displayed in the branch in
which they have been created.
If a monitoring set has been created in the KVM extenders branch, it is no longer
displayed in the KVM combinations branch!
4. Click OK to activate the selected set.
Duplicating monitoring sets
The KVM combinations branch as well as many other device-specific branches contain
several default groups. Those groups are displayed in light grey.
IMPORTANT: It is not possible to edit or delete those groups.
If you want to create a new set based on an already existing set, simply duplicate the
existing set and edit the duplicate.
How to duplicate a monitoring set:
1. Right-click the KVM combinations branch in the tree view.
2. Click the Monitoring sets entry in the context menu.
3. Select the set to be duplicated and click Edit.
4. Enter the name and an optional comment for the set.
5. Click Duplicate to duplicate the existing set.
6. Edit the new set as described on the previous page or click Close to close the window.
43 · Dynamic-UserCenter 32