Config Panel - Guntermann und Drunck GmbH

Firmware update
Basic configuration of the web application
The firmware of each device can be easily updated via the web application.
IMPORTANT: This function only updates the firmware of the device on which the
web application has been started!
How to update the firmware:
1. Open the web application of the device whose firmware you want to update.
2. Click the tools symbol in the toolbar.
3. Click the Tools > Firmware update tabs.
4. Enter the storage location and the name of the backup file into the Path entry.
IMPORTANT: Use the information provided in the Device and Comment entries to
check if you selected the correct device file.
ADVICE: Use the file dialog to select the location and the name of the update file.
5. Click on Update now.
6. Click OK to leave the interface.
Restoring the default settings
This function enables the user to restore the default settings of the device on which
the web application is operated.
How to restore the default settings:
IMPORTANT: All settings are reset.
1. Click the tools symbol in the toolbar.
2. Click the Tools > System defaults tabs.
IMPORTANT: Use the information provided in the Date and Comment entries to
check if you have selected the correct backup file.
3. Enable the option Delete dynamic ports to reset the configuration of the Dynamic
Ports.
4. Disable the Delete IP addresses option to maintain the configuration of the network
interfaces.
5. Click on System Defaults to reset the current configuration.
6. Click OK to leave the interface.
Dynamic-UserCenter 32 · 26