Graupner New Items 2008

RC Off-Road Truggy, scale 1:8, 4-WD
GM Fun-Truggy Leopard 4WD
1/8 RTR Racing
Order No. 90505.RTR, Scale 1:8
Order No. 90505.RTR
Order No. 90505
The GM Fun-Truggy LEOPARD 1/8
4-WD is a low-cost first model for
making a start in the world of 1:8 scale
Truggies.
It is supplied 95% factory-built, and can
be ready for the track in just a few
minutes. All you need to complete the
set are fuel, rechargeable batteries and
the Nitro Starter Set.
There are two versions: one the
90505.RTR variant described here, the
other the 90505 version without motor,
radio control system and servos, i.e.
just the factory-assembled chassis and
pre-painted body shell.
● Factory-assembled Ready To Run
4-WD Truggy chassis with four-wheel
drive and three steel bevel gear
differentials
● Three differentials (front, rear and
centre)
● High-quality two-channel
27 MHz AM rotary-knob RC
system with steering / throttle servos
and receiver already installed and
connected. Steering and throttle
linkages pre-adjusted (RTR version
only)
● Powerful, reliable GM Nitro Bull 28
motor of around 4.6 cc capacity and
integral pull-cord starter (RTR version
only)
116 New Items ’08
● Four adjustable aluminium oil-filled
shock absorbers, pre-filled
● Steel power transmission joints at the
rear, articulated CVD joints at the front
● Pre-trimmed polycarbonate body
shell, factory-painted.
Additional features
● Powerful double disc brake acting
upon all four wheels, separately
adjustable for front / rear axles
● Enclosed, splashproof RC box for
rechargeable battery and receiver
● Large Truggy wheels and tyres,
bonded and fitted
● Aluminium tuned pipe silencer for
enhanced power
● Fueltank capacity 125 cc
● Fully ballraced
● Four-wheel drive via central articulated
shaft with centre differential
● Torsionally stiff 3.0 mm
aluminium
6061-T6
chassis
● Power steering servo with 7.2 kg
output torque (RTR version only)
● Comprehensive adjustment
facilities for tracking and
camber, various shock
absorber positions for the
optimum set-up.
Specification
Length approx. 530 mm
Width approx. 420 mm
Height approx. 200 mm
Weight ready to run,
approx. 3700 g
Motor approx. 4.6 cc
Wheel diameter 140 mm
Wheelbase 360 mm
The illustration shows the prototype RTR model with motor, RC system, etc.
RC functions
Right / left
Throttle / brake