Graupner New Items 2008

A selection of the most important function and
multi-function programmes
TRAVEL ADJ
Separate travel adjustment left and right,
range 0 – 150 %, for throttle, ailerons, elevator,
rudder, retracts and collective pitch
functions.
120° CCPM
Set-up menu for fine adjustment of the
swashplate system, useful for trimming out
system inaccuracies
PITCH CURVES
A five-point collective pitch curve system
provides very accurate collective pitch hover
adjustment. Full-Slow position, ¼ position,
centre position, ¾ position and Full-High
position, all variable separately.
MODELL COPY
The copy menu allows the operator to copy
tested model configurations into a vacant
model memory as the starting point for a
new model.
REVERSING SW
Servo reverse switching for throttle, ailerons,
elevator, rudder, retracts and flap servo, can
be selected and stored separately for each
model.
THRO CURVES
A five-point throttle curve system permits
accurate fine-tuning of motor characteristics
to suit the requirements of the helicopter
MONIT servo travel monitor
The graphic servo travel monitor provides
the means to check all servo functions
simultaneously for servo centre and travels.
SWASH TYPE
Swashplate type, one servo: standard
mechanical mixing. This type uses separate
servos for the roll, pitch-axis and collective
pitch functions.
Basic HELI system display
Transmitter screen displays, transmitter battery
voltage / state of charge, HELI model
type, model memory No. 1 - 10, model
name (eight characters), PPM or SPCM
modulation, and TOTAL T (model operating
time).
MODULATION
PPM or SPCM modulation can be set separately
for each model memory to suit the
receiving system installed in the model
FAIL SAFE
In SPCM MODE it is possible to program a
PCM Hold position for the servo functions.
Fail-safe programming is not possible in
PPM MODE.
SWASH TYPE
Swashplate type, two servos: mixer for three
roll / collective pitch servos; the pitch-axis
function is mixed in mechanically.
MODEL SEL
In the Model Select menu ten models can be
stored separately, and called up when required.
The memories contain model type, PPM
/ SPCM modulation, model memory No. 1 -
10, model name and model operating time.
REVO MIX
All-purpose programmable mixers provide
for programming of extreme auxiliary functions,
such as revolution mixing for model
helicopters.
THROTTLE HOLD
The Throttle Hold menu enables the user to
set the auto-rotation throttle position accurately.
SWASH TYPE
Swashplate type, three servos: symmetrical
three-point linkage, all three servos are used
for all three functions: roll, pitch-axis and
collective pitch.
New Items ’08
151
R/C systems and accessories