Graupner New Items 2008
Graupner New Items 2008
Graupner New Items 2008
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Order No. 2001<br />
● Ready-made model (RTR)<br />
● Vacuum-moulded hull and deck,<br />
already joined<br />
● Incl. outboard motor with powerful<br />
SPEED 500 electric motor<br />
● Incl. receiver, rudder servo and<br />
throttle servo with mechanical motor<br />
switch, installed and ready to use<br />
● Set contents: joined hull and deck,<br />
cockpit cover, outboard motor with<br />
electric motor installed, boatstand<br />
with foam supports, decals applied,<br />
small items<br />
Specification<br />
Overall length approx. 820 mm<br />
Hull length, approx. 630 mm<br />
Beam approx. 210 mm<br />
All-up weight approx. 1.5 kg<br />
RC functions<br />
Rudder<br />
Forward running, on / off<br />
Recommended accessories<br />
Order No. Description<br />
98900 Drive battery: GM Power<br />
Pack 6N-3600<br />
Ni-MH 7.2 V/3.6 Ah<br />
3426 AA-size dry cells for transmitter<br />
and receiver power<br />
supply<br />
(3 packs of 4 required)<br />
6407 MULTILADER 3 battery<br />
charger (for drive battery)<br />
Replacement parts<br />
Order No. Description<br />
2001.3 Hatch cover<br />
.5 Outboard motor with<br />
electric motor<br />
.6 Propeller<br />
● RTR (Ready-To-Run)<br />
● The full-size vessel is a day cruiser<br />
which is used for day-trips and<br />
weekend voyages.<br />
● For this reason the boats are<br />
typically operated in the<br />
Mediterranean and the Southern<br />
East and West coasts of the USA<br />
● The boat is ready for the water as<br />
soon as you have charged the drive<br />
battery and fitted the dry cells for<br />
the transmitter and receiver<br />
● The model is finished in silver,<br />
which shows off the attractive<br />
decals particularly well<br />
● The model can easily be upgraded<br />
by fitting an electronic speed<br />
controller (Order No. 7197);<br />
no soldering required<br />
● The electric motor is installed in the<br />
outboard housing at an angle, so<br />
that the deflection angle of the<br />
flexible drive shaft is as small as<br />
possible. This provides a significant<br />
improvement in the efficiency of the<br />
power system<br />
<strong>New</strong> <strong>Items</strong> ’08<br />
69<br />
Boat models