Graupner New Items 2008

● Professional standard microcomputer
radio control system
exploiting the latest Graupner iFS
2.4 GHz technology
● Bi-directional communication
between transmitter and receiver.
● No crystals, no channel settings
required. Simultaneous operation
of up to 120 transmitters possible
without interference problems.
● Ultra-fast transmission rate
for super-fast response
● Completely eliminates interference
from electric motors, servos and
electrical charge (metal-to-metal
noise).
● Short aerial, folding, removable
● Future-proof due to updatecapable
operating system
● Thirty model memories
● 3-D Cylinder-Rotary encoder and
four programming buttons for
accurate settings and high-level
programming convenience.
● MULTI-DATA GRAPHIC LCD
monitor: high-resolution screen
ensures perfect monitoring,
accurate graphical depiction of
multi-point curves for throttle,
collective pitch, tail rotor etc.,
plus EXPO / DUAL-RATE functions
and mixer curves.
● Simple method of switching
between stick modes 1 - 4.
● Real Time Processing (RTP).
All entered settings and changes
take effect at the receiver output
virtually in real time.
● ADT Advanced Digital Trim system
for all four stick trim functions,
with quick-response throttle idle
trim.
● Six freely programmable mixers,
four linear and two five-point
curve mixers, variable in 1%
increments. The throttle and
collective pitch curves present in
the Helicopter Menu feature a
multi-point curve system (MPC).
This curve rounding system can
be switched on and off, and is
also available in the free curve
mixers. The system generates an
ideally rounded curve shape by
means of an ingenious polynomial
approximation process.
● Two-stage Expo / Dual-Rate
system, individually variable,
switchable in flight, programmable
separately for each model.
● Helicopter swashplate mixer
for 1-point, 2-point, 3-point and
4-point mixing.
● Sub-trim for fine-tuning the neutral
position of all servos.
● Aileron differential mixer
● Butterfly mixer
● Flaperon mixer
● Graphical servo display provides
a fast, straightforward method of
viewing and checking all servo
settings.
● Servo travel limit for all servo
channels, separately variable for
each end-point.
● Stopwatch / Count-down timer
with alarm function.
● Operating hours timer, available
separately for each model.
● HELP BUTTON provides valuable
notes on programming, relevant
to the currently selected programming
menu.
● Model copy function for all model
memories.
Set contents
mx-22 iFS micro-computer synthesizer
transmitter with integral NiMH transmitter
battery, XR-20 iFS bi-directional 2.4
GHz iFS receiver, DS 5077 servo,
switch harness
Replacement part
Order No. Description
3100.6 Telescopic transmitter aerial
Accessories
Order No. Description
1121 Neckstrap, 20 mm wide
70 Neckstrap, 30 mm wide
3100.6 Telescopic transmitter aerial
4178.1 Diagnosis lead
3290.22 Trainer / PC module for mx-22
3290.33 Pupil module for mx-22
4182.9 PC interface lead, mc-22 / PC
9 Aluminium transmitter case
Technische Daten
mx-22 IFS
Radio control system
Frequency band 2.4 ... 2.4835 GHz
Modulation Intelligent Frequency Select
Control functions 10, 4 with proportional trims, 4 proportional, 2 switchable
Servo resolution 65,536 steps (16-bit)
Temperature range –15 +55 °C
Telescopic aerial 10-section, approx. 1150 mm long
Operating voltage 9,6 ... 12 V
Current drain approx. 190 mA
Dimensions approx. 195 x 200 x 75 mm
Weight approx.
* with receiver XR-24 iFS
Order No. 23603
970 g incl. transmitter battery
New Items ’08
145
R/C systems and accessories