Graupner New Items 2008

RC Off-Road Buggy, 1:8 scale, 4-WD
HoBao HYPER 8.5 RTR Racing Buggy
Order No. 90047.RTR
Scale 1:8
Order No. 90047.RTR
● The HYPER 8.5 RTR 4-WD Racing
Buggy is based on the HYPER 8.5
PRO used by the 2007 European
Champion, and is supplied 95%
factory-assembled
● Factory-assembled, ready-to-run
four-wheel drive chassis with three
differentials
● High-quality two-channel 27 MHz AM
rotary-knob radio control system,
with HYPER 8.5 steering / throttle
servos and receiver installed and
connected. The steering and
throttle linkages are pre-adjusted.
● Reliable, high-performance Hyper
MAC 21 3P motor, capacity approx.
3.5 cc, with pull-cord starter
● Four adjustable oil-filled shock
absorbers, pre-filled and installed
● Fuel filler bottle and tool supplied
● Pre-trimmed polycarbonate body
shell, multi-colour painted
● The comprehensive set contents
enable the user to prepare the
HYPER 8.5 RTR for racing in a very
short time; the only accessories
required are those listed below.
98 New Items ’08
Additional features
● Twin disc brake, separately variable
front and rear
● Sealed box for battery and receiver
● Wheels and tyres assembled and
glued
● Tuned pipe and exhaust manifold
matched to the Hyper MAC 21
3P motor
● Robust articulated joints on the front
axle
● Fully ballraced
● Adjustable Ackermann, variable toe-in
and castor angle
● Transverse stabiliser bars on front and
rear axles
● Carefully pre-adjusted and fine-tuned
chassis with long spring travels and
sophisticated suspension geometry
● Extremely robust, torsionally rigid
aluminium chassis
European Champion
2007 HYPER 8.5
The illustration
shows the model in its
standard form; the set
contains everything shown in the picture, including motor, RC system, etc.
RC functions
Right / left
Throttle / brake
Specification
Length approx. 460 mm
Width approx. 305 mm
Height approx. 200 mm
Wheelbase 325 mm
Weight ready to run,
approx. 3500 g
Motor 3.5 cc