Graupner New Items 2008

Order No. 2017
● Ready-made model (ARTR)
● GRP hull
● For single electric motor power
system
● With factory-fitted ballraced stern
tube, rudder system, aluminium
turn-fin, aluminium motor mount
● Set contents: hull, hatch cover,
floats, stern tube, rudder system,
propeller, laser-cut parts for servo
mount and boatstand, shaft
coupling, water-cooling coil, decal
sheet, rudder linkage components,
small items
Specification
Overall length approx. 675 mm
Hull length approx. 600 mm
Beam approx. 420 mm
All-up weight approx. 1.3 kg
RC functions
Rudder
Proportional speed control, forward only
Recommended accessories
Order No. Description
4714 X-412 40 MHz FM RC set
2847 POWER V60 speed controller
3899 C 3041 ECO mini-servo
for rudder
97157 GM Pinnacle Diamant
SP motor
2490.7 GM Power Pack drive battery,
7N-3600 Ni-MH 8.4 V / 3.6 Ah
Please refer to the building instructions for additional
accessories
Replacement parts
Order No. Description
2017.2 Hull
.3 Hatch cover
.5 Rudder system
.6 Turn-fin
.7 Float set
The illustrations show the model painted
with the supplied decals applied
● ARTR (Almost Ready To Run)
● Suitable for the HYDRO 1 or
HYDRO S7 racing class when fitted
with a suitable power system
(see also www.nauticus.info)
● The carbon-look floats can be
unscrewed for adjustment;
the optimum angle relative to
the hull can be set by fitting
spacer washers
● GRP hull supplied in white
finish, in order to allow the
modeller to apply the painted
colour scheme of his choice
● Additional upgrade power
system variants will be published
on the Graupner website when
comprehensive tests have been
completed
New Items ’08
67
Boat models