Graupner New Items 2008

Looking back at 2007
Ideas Expo 2007
The Ideas Expo was held in Hanover from
6 to 14 October 2007, and attracted more
than 160,000 visitors. RB 1000 played
a major role in the central science show
every day. The picture shows Christian
Wulf, Prime Minister of Lower Saxony,
and Rolf Meyer of the Ideenexpo GmbH
company. Picture: picture-alliance/ dpa
For more information contact
www.ideen-expo.de
Heli Camp 2007 with LOGO 10
The first ever Heli Camp was organised at the GRAUPNER works on
29 - 30 September. Beginners to helicopters were instructed by professionals,
and shown how to build, set up and optimise an electric model helicopter
for good flying characteristics using the LOGO 10 as an example.
www.graupner.de www.heli-camp.de
2 New Items ’08
JetPower Meeting at Bad Neuenahr
GRAUPNER had a new stand at the Fair.
Jet World Masters 2007 in Northern Ireland
The German Jet Team was very successful at
this event, and took several awards back home
with them. The following individual placings
were achieved:
1 st place Individual Class and World Champion:
Stephan Völker
2 nd place Individual Class Thomas Höchsmann
4 th place Individual Class Thomas Gleissner
4 th place Open Class Thomas Singer
1 st place Team World Championship
F3B World Championships in Emmen,
Switzerland
1 st place, World Champion: Martin Herrig
2 nd place: Andreas Herrig
6 th place: Reinhard Liese
1 st place Team World Championship
Andreas Herrig, Martin Herrig
and Reinhard Liese
Modellflugrecht, Paragrafen
und mehr
(Model Aviation Law, Legal
Requirements and more)
by Walter Felling, solicitor
Order No. 8034.02
This brochure is aimed at model flyers
and would-be model flyers, and contains
important registration addresses
and authority contacts.
RC-SOCCERBOT
Exercises / Teacher’s guide book
Order No. R1001.110
This book is the complete guide to the
successful use of the RC SOCCERBOT
robot in a teaching environment, and is
the key to becoming properly familiar
with the machine.
Starting with the installation of the software
and moving on through simple
initial exercises, the guide also covers
the construction of the robot with the
help of 3-D CAD drawings. Practice
units with the completely assembled
robot are followed by sections covering
a wide range of expansions. All the
robot programs accompanying these
chapters in the book can be downloaded
at no charge from the website
Polo-shirt, red
Sporty polo-shirt made of 100% cotton.
With embroidered »GRAUPNER
Modellbau» emblem.
Order No. 8081.30 Size S
Order No. 8081.31 Size M
Order No. 8081.32 Size L
Order No. 8081.33 Size XL
Order No. 8081.34 Size XXL
Graupner pilot’s jacket
Soft-shell jacket made of 93%
polyester, 7% elastan.
The jacket is windproof and weatherproof,
and features a micro-fleece
lining, net under-arm inserts and
various pockets.
Order No. 8393.1 Size M
Order No. 8393.2 Size L
Order No. 8393.3 Size XL
HYPERLINK "http://www.graupnerrobotics.de"
www.graupner-robotics.de.
The complete construction of the robot,
with animated 3-D CAD support, can
also be downloaded.
This model robot can be used for a
vast range of teaching modules in the
areas of mechanics, electronics and -
of course - information technology.
Whether you wish to tackle design
tasks, discuss the subject of sensors
and actuators with your pupils using
practical examples as an aid, or make a
start with the programming language
C++, this robot is the ideal starting
point for a wide range of challenges
and tasks. The components which we
produce are to industrial standards, and
your pupils will subsequently encounter
them again in the same form in his or
her professional life.
Support your teaching with exciting,
practical exercises with the robot.
At HYPERLINK "http://www.graupnerrobotics.de"
www.graupner-robotics.de
you can download a compressed
excerpt from this book in the form of an
ebook, at no cost. 142 pages in colour,
bound in book-form
New Items ’08
201
Accessories for model-making