Graupner New Items 2008
Graupner New Items 2008
Graupner New Items 2008
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
GRAUPNER ducted fan unit<br />
Order No. 1371.72<br />
● Ducted fan unit for use in model jets<br />
● Two mounting lugs<br />
● Removable air intake ring<br />
● Simple and quick to install<br />
● Accessories for mounting motor and<br />
rotor, including allen wrench<br />
Specification<br />
Outside diameter (O.D.)<br />
approx. 72 mm<br />
Inside diameter (I.D.)<br />
approx. 69 mm<br />
Rotor diameter approx. 68 mm<br />
Rotor 4 blades<br />
Stator vane count 4 blades<br />
Weight 56 g<br />
Max. motor diameter<br />
approx. 29 mm<br />
Shaft diameter approx. 3.175 mm<br />
Recommended accessories<br />
Order No. Description<br />
6549 GRAUPNER INLINE 420i<br />
11,1 V/3450 kV<br />
2896 GENIUS 40<br />
oder<br />
2897 GENIUS 70<br />
Aluminium tricycle retractable undercarriage unit <br />
Order No. 179<br />
Top-quality tricycle retract system, CNC-machined from<br />
heavy-duty aluminium. Single-circuit system, i.e. the wheels<br />
retract under the action of compressed air, but extend under<br />
spring pressure. All units lock when retracted and extended.<br />
Size and format correspond to standard Eurokit retract units.<br />
Undercarriage pivot pin: 6 mm Ø. Suitable for models with<br />
take-off weights of up to 15 kg.<br />
Pack contents: steerable noseleg retract unit, two main<br />
retract units, control valve, compressed air connectors, air<br />
reservoir.<br />
2266.80<br />
2266.98<br />
2266.102<br />
Motor mount<br />
Order No. 2266.80 For 4 cc to 9 cc<br />
capacity motors<br />
Order No. 2266.98 For 9 cc to 15 cc<br />
capacity motors<br />
Order No. 2266.102 For 15 to 20 cc<br />
capacity motors<br />
The two motor mount brackets are<br />
simply positioned on the model’s nose<br />
bulkhead (firewall), spaced to suit the<br />
crankcase width, and are secured using<br />
the fixings supplied. The motor is<br />
attached to the mount arms using the<br />
self-tapping screws supplied in the set.<br />
The mount arms can be shortened if<br />
required.<br />
Smoke pump<br />
Order No. 6825<br />
This high-performance miniature smoke<br />
pump is intended for use in model<br />
aircraftspowered by turbines and internal-combustion<br />
engines. A small 7.4 V<br />
(LiPo) or 6-cell NiMH battery is required<br />
as power supply. An opto-coupler minimises<br />
potential interference and allows<br />
an integral electronic switch function to<br />
be included. The battery can therefore<br />
be left connected to the smoke pump<br />
without becoming discharged.<br />
The working range can be adjusted to<br />
suit any RC system transmitter using a<br />
button.<br />
The smoke pump is of impressively<br />
high-quality aluminium construction. It<br />
also features an external socket for use<br />
with a cut-off valve.<br />
Set contents: smoke pump, readymade<br />
<strong>Graupner</strong> power adaptor with<br />
green high-current plug, one-way valve,<br />
instructions.<br />
Specification<br />
Power supply 6 ... 8.4 V, typically<br />
1.5 A<br />
Weight approx. 60 g<br />
Dimensions approx. 25 Ø x 52 mm<br />
174.3<br />
174,2<br />
Replacement tyres for undercarriage<br />
(trailing-link undercarriage legs)<br />
Order No. 174.2 for main undercarriage,<br />
1 pair<br />
Order No. 174.3 for noseleg, 1 unit<br />
Stable, low-wear lightweight foam tyres<br />
to fit the wheels of the undercarriage<br />
legs 174.1<br />
Hopper-Tank<br />
Order No. 132<br />
The hopper tank is a high-quality header<br />
tank of all-plastic construction,<br />
suitable for kerosene and petrol-based<br />
fuels. The tank features a large membrane<br />
pick-up which ensures a bubblefree<br />
flow of fuel to jet engines and<br />
petrol engines. The ultra-fine membrane<br />
technology filters out even the smallest<br />
of air bubbles. The hopper tank features<br />
triple connections for venting and /<br />
or saddle tanks, refuelling, and feed to<br />
the pump or engine. Integral high-quality<br />
Festo fittings for 6 mm hose.<br />
Set contents: hopper tank including<br />
Festo connections<br />
Specification<br />
Capacity approx. 300 ml<br />
Weight approx. 44 g<br />
Dimensions approx. 120 x 63 x 63 mm<br />
<strong>New</strong> <strong>Items</strong> ’08<br />
193<br />
Accessories for model-making