Graupner New Items 2008

RC electric model aircraft
Elektro UHU
Order No. 9400, Order No. 9400.100, Order No. 9400.200, Order No. 9400.300
Wingspan 1200 mm
Order No. 9400
● Ready-made one-piece wing with
CFRP spar and integral motor pylon
● The wing is attached using two
plastic M4 screws fitted from the
underside - virtually invisible
● One-piece ready-made fuselage with
CFRP-reinforced tail boom. The RC
components are easily accessible
and fit neatly in pre-formed recesses.
● Optional tricycle undercarriage,
allowing realistic-looking ground
take-off into wind from smooth
runways.
● The high-performance wing airfoil
provides outstanding glide capability.
● The pack includes tri-lingual building
instructions and DVD showing the
model’s assembly.
28
New Items ’08
Order No. 9400.100
The RR (Ready for Radio) version is
powered by a factory-installed SPEED
400 PLUS 7.4 V power unit including
CAM FOLDING PUSHPROP.
The C 231 rudder and elevator servos
are also pre-fitted.
The fuselage, wing and tailplane are
equipped with fixing components and
CFRP reinforcements. The canopy is
prepared, ready to install. The horns
are glued in place, and the servo
output arms are pre-fitted with swivel
pushrod connectors. The pack also
includes a decal sheet, tri-lingual
operating instructions and undercarriage
components.
Receiver
Type Order No.
C8 FM 35 3172
The illustration shows the model fitted out with accessories.
Specification
Wingspan approx. 1200 mm
Overall length approx. 920 mm
Wing area approx. 19.2 dm²
Tailplane area approx. 3.8 dm²
Total surface area approx. 23.0 dm²
Total surface area loading 26 g/dm²
All-up weight according
to fittings approx. 600 g