Graupner New Items 2008

3832.1
3832.3
Specification servos
Example of use
Example of use
3832.2
Servo mounts
Order No. 3832.1 for standard servos
Order No. 3832.2 for DS 3210 servo
Order No. 3832.3 for servos such as DS 3328 / C 3341
These servo mounts are accurately laser-cut from beech
plywood, and are simply glued at the appropriate positions in
the wing, tailplane or fuselage. The servos are then secured
using self-tapping screws, allowing them to be removed
again at any time.
Type DS 288 DS 8922 DS 8911
Order No. 5181 5185 5190
Operating voltage approx 4,8 ... 6 V 4,8 ... 6 V 4,8 ... 6 V
No-load current drain approx. 14 mA 13 mA 14 mA
Current drain max. approx. 285 mA 2600 mA 2750 mA
Torque approx. 9 Ncm (0,9 kg/cm) 140 Ncm 270 Ncm
Holding power approx. > 50 Ncm 272 Ncm 328 Ncm
Angular travel approx. 2 x 90° 2 x 45° 2 x 45°
Transit speed approx. 0,16 s/40° 0,058 s/40° 0,1 s/40°
Weight approx. 9 g 69 g 69 g
Dimensions (L x W x H) approx. 22 x 21 x 11 mm 40 x 21 x 40 mm 40 x 21 x 40 mm
Electronic On / Off switch
Order No. 4131
Radio-controlled electronic On / Off
switch, up to 12 V / 8 A capacity, with
integral battery monitor.
Dimensions (L x W x H)
approx. 60 x 19 x 14 mm
Dual power supply
Order No. 4132
Dual power supply unit for receiving
systems, suitable for LiPo batteries,
with integral battery monitor.
Operated by a magnet switch.
Dimensions (L x W x H)
approx. 60 x 19 x 14 mm
Magnet switch operated On / Off
switch
Order No. 4133
Magnet switch operated On / Off
switch with regulated output voltage for
receiver power supply with two LiPo
batteries, with voltage monitor.
Dimensions (L x W x H)
approx. 60 x 19 x 14 mm
High current On / Off switch
Order No. 4134
Electronic, high-current, failure-proof,
zero-contact On / Off switch for RC
systems and electrical consumer units.
10 A continuous current / 20 A peak
current
Dimensions (L x W x H)
approx. 60 x 19 x 10 mm
New Items ’08
159
R/C systems and accessories