Graupner New Items 2008

Universal accessories
Model ballast
Pure tin
Order No. 3663.50 50 g
Order No. 3663.100 100 g
Order No. 3663.2000 2000 g
For balancing model aircraft and boats.
196 New Items ’08
Textured sheet
Vacuum-moulded from 0.5 mm ABS sheet, white.
Sheet size approx. 490 x 300 mm
Order No. 740.4 4 x 4 mm pattern
Two-pack clear lacquer
Order No. 903
New two-pack clear lacquer in a spray can, specifically
developed for modelling applications. This final lacquer produces
a fuelproof, scratch-resistant surface on models powered by internalcombustion
engines. It is also an excellent choice for any model
whose surfaces are particularly susceptible to mechanical damage.
The hardener is supplied in a supplementary spray container which is
attached inside the main can, and is injected directly into it when
required. Suitable for all materials used in modelling. Suitable colour
paints as base coats: GRAUPNER ACRYLFIX, ALKYFIX (other paint
types must be tested beforehand). It is important to read and observe
the notes printed on the spray can!
Spray can content 400 ml, pot-life around 24 hours.
When the pot-life has elapsed, any lacquer remaining in the can is
cured, and cannot be used.
Textured sheet
Vacuum-moulded from 0.5 mm ABS sheet, white.
Sheet size approx. 490 x 300 mm
Order No. 740.6 6 x 6 mm pattern
Special free-running ballrace oil
Order No. 95200
This very low-viscosity ballrace oil is extremely resistant to
high temperatures, and is ideal for all high-performance
ballraces, especially as used for the motor bearings, Order
No. 95203. Electric motors operating at extreme rotational
speeds and high temperatures are under very high stress,
and in these circumstances this oil can improve overall
efficiency by up to 3%.
The lubricant is also an excellent choice for all ballraces in
model vehicles.
High-performance ballraces should be oiled regularly, using
this oil exclusively.
The lubricant is supplied in a squeeze bottle with needle for
ease of application. Contents approx. 10 ml