Graupner New Items 2008

● Twelve control functions:
simplified method of assigning control
elements such as primary sticks,
external switches, proportional controls
and trim levers as transmitter control
functions for multi-function model
boats and cars, without the need to
install external switches or switch
modules
● Future-proof: update-capable
operating system
● 3-D Rotary Encoder in conjunction
with four programming buttons for
easy, convenient and accurate setting
of values
● MULTI-DATA GRAPHIC LCD
monitor: high screen resolution for
accurate monitoring and precise
graphic display of curves and
characteristic lines
● Real Time Processing (RTP):
settings and changes take place
virtually in real time
● ADT (Advanced Digital Trim System)
● CONVENIENT MODE SELECTOR:
simple method of switching stick
modes 1 - 4 (e.g. throttle right /
throttle left)
● Three freely programmable
mixers for RC model aircraft,
helicopters, boats, cars and trucks
● Three-point mixers for throttle,
collective pitch and tail rotor, plus
gyro offset. These settings can be
entered separately for each flight phase
● Fixed-wing / Helicopter: Dual Rate /
Expo for Ch2 - Ch4 (switchable in
common for each channel)
● Phase trim according to model
type: camber-changing flaps, ailerons,
elevator
● Helicopter swashplate mixers for
1-point, 2-point, 3-point and 4-point
linkages
● Comprehensive fixed-wing mixer
menu with twelve set-up programs
for two ailerons and two camberchanging
flaps (number of servos)
● Servo travel settings for twelve
servos, servo reverse, servo centre,
servo travel, variable separately for
each side, graphic display for all servos
● Fail-Safe programmable for PCM /
SPCM
● Two switch-operated timers,
stopwatch and flight time / running
time
● HELP BUTTON with notes relating
to the currently selected programming
menu
● Trainer system with total control
transfer; all settings entered at the
Teacher transmitter
● Nautic control function for operating
the Nautic Expert module
● Model copy function for all model
memories
Set contents
mc-19S micro-computer Synthesizer
transmitter with integral NiMH battery,
R16SCAN FM narrow-band miniature
receiver on the appropriate frequency,
C 577 servo, switch harness
Accessories
Order No. Description
10.1 Aluminium transmitter case
71 Luxury neckstrap
72 Luxury cross-over strap
72.40 De luxe cross-over strap
1125 Wide neckstrap
1127 Transmitter support system
1128 Short stick
3289 Trainer system
3290.3 Pupil module
4110 Protective caps for
stick-switches
1149.35 Helical stub aerial, 35 MHz
1149.40 Helical stub aerial, 40 MHz
3093 CONTEST carbon-look
transmitter tray
3098 Windshield for carbon-look
transmitter tray
4182 Programming interface
mc-19S/mc-22S
4182.3 Interface distributor
4182.9 PC Interface lead
mc-19S/mc-22S
Replacement parts
Order No. Description
4300.6 Telescopic aerial
.60 Stainless steel telescopic aerial
Specification
Transmission system SPCM 20 / PCM 20 / PPM 18 / PPM 24 selectable
RF module Integral transmitter Synthesizer module
(35 / 35 B-band, 40 / 41 MHz band)
Channel spacing 10 kHz
Control functions SPCM = 10, PCM = 10, PPM = 9, PPM 24 = 12
Basic control functions 6 functions
Control channels 10 (4 proportional with trims, 6 proportional or switched)
plus 2 software control functions
Channel pulse width 1,5 ms + 0,5 ms
Servo travel resolution SPCM 20 10-bit (1024 steps), PCM 20 9-bit (512 steps)
Temperature range – 15 ... + 55 °C
Telescopic aerial 10-section, approx. 1470 mm long
Operating voltage 9,6 ... 12 V
Current drain approx. 40 mA (excl. RF module)
Dimensions approx. 225 x 215 x 70 mm
Weight approx. 900 g excl. transmitter battery
New Items ’08
155
R/C systems and accessories