Graupner New Items 2008

Specification
Overall length approx. 600 mm
Beam approx. 188 mm
Overall height approx. 300 mm
All-up weight approx. 1.9 kg
(with working fire monitor)
Scale approx. 1 : 25
Replacement parts
Order No. Description
2129.2 Hull, CNC-trimmed
.3 Deck, CNC-trimmed
.4 Laser-cut ABS
superstructure parts
Rendered 3-D
data of the boat design
Recommended accessories
Order No. Description
4729 X-408 40MHz RC set
2875 NAVY V40R speed controller
3323 SPEED 600 ECO 7.2 V
2490.6 GM-Power-Pack drive battery,
6N-3600 7.2 V / 3.6 Ah
(two required)
3061 G2 parallel cable
3389 Copper flex cable
3588 Suppressor capacitors
2989 G2 connector system
Accessories for the fire monitor
auxiliary working system
Order No. Description
393 Fire extinguishing monitor
7171 PICO 8
914 Water pump
2989 G2 connector system
3068 G2 distributor cable
● The Graupner MULTIBOAT is based
on a French pilot boat. The dockyard
uses this type as the basis for various
other specialised vessels for the
police, coastguard, lifeguard, fire
service, customs and harbour sevices.
● The design of the model makes it ideal
as an easy start into boat modelling,
as all the preparation for the potentially
difficult stages is already completed.
Nevertheless, the non-critical steps are
left for the would-be model builder to
carry out, thereby imparting the basic
skills of marine modelling.
● The hull and deck are machine-trimmed,
thereby eliminating the tedious
task of cutting out these parts.
● All superstructure components are
supplied as laser-cut ABS items which
simply need to be slotted together and
glued. Once again, no cutting is
involved.
● The model has to be painted, but
again the modular construction makes
this much simpler, as many parts are
only assembled or attached to the
boat when they have been painted.
● The fittings are supplied as injectionmoulded
components, and are simply
glued in place.
● The fire monitor auxiliary working
system can be installed in the finished
model at any time. The silicone hose
and intake tube are included in the
basic kit.
The fire monitor and pump are easy
to install subsequently.
● The building instructions describe the
installation of additional optional
working systems in the form of a
lighting system and rotating radar
antenna.
The additional accessories required
for these systems are listed in the
building instructions.
New Items ’08
63
Boat models