TNPFA 4.1.1 Installation and User Guide - e IBM Tivoli Composite ...

Tivoli Netcool Performance Flow Analyzer uses further configuration files for modifying the default
name and description of protocols, services, applications, service types, ICMP codes, autonomous
system numbers and SNMP interface indexes to be modified. For instance, if the http protocol is
known to be used over the non-standard port 8080 in addition to port 80, it can be entered in the
services configuration file. Changes in these configuration files affect newly generated reports after the
modification. The filenames with examples of contents are listed below.
/etc/tnpfa/protocols
# (C) Copyright IBM Corp. 2003 - 2010 All Rights Reserved
#
# TNPFA registered protocols
#
# Number Name Description
# ----------------------------------------------------------------------
0 HOPOPT "IPv6 Hop-by-Hop Option [RFC1883]"
1 ICMP "Internet Control Message Protocol [RFC792]"
2 IGMP "Internet Group Management Protocol [RFC1112]"
3 GGP "Gateway-to-Gateway Protocol [RFC823]"
/etc/tnpfa/services
# (C) Copyright IBM Corp. 2003 - 2010 All Rights Reserved
#
# TNPFA registered services
#
# Name Port Protocol Appl Description
#-----------------------------------------------------------------------
#port0 0 TCP,UDP OTHER "TCP/UDP port 0
forbidden)"
tcpmux 1 TCP OTHER "TCP port service
multiplexer"
compressnet 2 UDP NETMNG "Management utility"
compressnet 3 UDP NETMNG "Compression
/etc/tnpfa/applications
# (C) Copyright IBM Corp. 2003 - 2010 All Rights Reserved
#
process"
40 IBM Tivoli Netcool Performance Flow Analyzer: Installation and User Guide