User's guide of Proceessing Modflow 5.0

4 Processing Modflow
System Requirements
Hardware
Personal computer running Microsoft Windows 95/98 or Windows NT 4.0 or above.
16 MB of available memory (32MB or more highly recommended).
A CD-ROM drive and a hard disk.
VGA or higher-resolution monitor.
Microsoft Mouse or compatible pointing device.
Software
A FORTRAN compiler is required if you intend to modify and compile the models
MODFLOW-88, MODFLOW-96, MOC3D, MT3D or MT3DMS. For the reason of compability,
the models must be compiled by a Lahey Fortran compiler. The source code are saved in the
folder \Source\ of the CD-ROM.
Setting Up PMWIN
You install PMWIN on your computer using the self-installing program PM32007.EXE
contained in the folder \programs\pm5\ of the CD-ROM. Please note: If you are using
Windows NT 4.0, you must install the Service Pack 3 (or above) before installing PMWIN. Refer
to the file readme.txt on the PM5 CD-ROM for more information.
Documentation
The folder \Document\ of the CD-ROM contains electronic documents in the Portable
®
Document Format (PDF). You must first install the Acrobat Reader before you can read or print
®
the PDF documents. You can find the installation file of the Acrobat Reader in the folder
\Reader\. Execute the file \Reader\win95\ar302.exe from the CD directly and follow the
screen to install the Reader.
Starting PMWIN
Once you have completed the installation procedure, you can start Processing Modflow by using
the Start button on the task bar in Windows.
1. Introduction