User's guide of Proceessing Modflow 5.0

212 Processing Modflow
There are eight main steps in this tutorial:
1. Create a new model,
2. Define model size,
3. Refine model grid,
4. Assign model data,
5. Perform steady-state flow simulation,
Fig. 6.1 Plan view of the model area
6. Extract and view results from the steady-state simulation,
7. Produce output from the steady-state simulation, and
8. Transient flow simulation.
This tutorial will lead you through the steps required to construct a working groundwater model
of the area being studied and to then use the model to assess the effects of changing some
parameters on the modelled results. Instructions are given for each step of the process in the
following manner:
- Select items from the menu: in BOLD
- A series of commands: linked by <
for example to open a new model the steps are File < New Model …
6.1.1 Tutorial 1 - Unconfined Aquifer System with Recharge