User's guide of Proceessing Modflow 5.0

66 Processing Modflow
Autodesk for exchanging data between CAD systems. HP-GL is a two-letter mnemonic graphics
language developed by Hewlett-Packard. These graphics formats can be processed by most
graphics or word-processing software, and graphics devices.
To save a plot, use the Format drop-down box to select a graphic format. Then, enter a
filename into the File edit field, or click and select a file from a dialog box. When finished,
click OK. Note that for the real-world display mode only the BMP-format can be used.
Print Plot...
3.3 The File Menu
Fig. 3.12 The Model Information dialog box
Fig. 3.13 The Save Plot As dialog box
This menu item is only activated in the Data Editor. After selecting this item, a Print Plot
dialog box is displayed with a preview window. The options are described below.
- Use full page: The plot is scaled to fit the paper, the original aspect ratio will not be
changed.
- Center on page: The plot is place on the center of the page.
- Image Size (millimeters): Specify the width and height of the printed image in millimeters.
- Margins (millimeters): Specify the left and top margins of the image in millimeters.
- Printer: A Printer dialog box allows you to select an installed printer and specify the print
quality, the paper size, source and orientation and other printing parameters.