User's guide of Proceessing Modflow 5.0

Processing Modflow 303
COLOR is the color used to draw the obervation vs. time curve of a borehole. The color is defined by a long
integer using the equation: color = red + green × 256 + blue × 65536, where red, green and blue
are the color components ranging from 0 to 255.
NAME is the name of the borehole.
Contour Table file
A contour table file can be saved or loaded by the Environment dialog box (see section 3.8).
File Format
1. Data: LABEL
2. Data: NL XXX XXX XXX XXX
(The following data repeats NB times)
3. Data: LEVEL COLOR FILL LVISIBLE LSIZE LDIS XXX XXX XXX
Explanation of Fields Used in Input Instructions
ALL DATA IN THE SAME RECORD ARE SEPARATED BY A COMMA OR BLANK.
LABEL is the file label. It must be PMWIN5000_CONTOUR_FILE
NL is the number of contour levels
XXX reserved.
LEVEL Contour level
COLOR is the color used to draw the contour line; The color is defined by a long integer using the equation:
color = red + green × 256 + blue × 65536, where red, green and blue are the color components
ranging from 0 to 255.
FILL is the color used to fill the space between the current contour and the next contour level.
LVISIBLE the contour is visible if LVISIBLE is TRUE.
LSIZE is the appearance height of the label text in the same unit as the model.
LDIS is the the distance between two contour labels, in the same unit as the model.
Grid Specification File
The grid specification file provides the grid geometry and location details.
File Format
1. Data: NROW NCOL
2. Data: X Y ANGLE
3. Data: DELR(NCOL)
4. Data: DELC(NROW)
Explanation of Fields Used in Input Instructions
NROW is the number of model rows.
NCOL is the number of model columns.
X is the x-coordinate of the top-left corner of the model grid.
Y is the y-coordinate of the top-left corner of the model grid.
ANGLE is the rotation angle expressed in degrees and measured countercolckwise from the positive xaxis.
DELR is the cell width along rows. Read one value for each of the NCOL columns. This is a single array
with one value for each column.
DELC is the cell width along columns. Read one value for each of the NROW rows. This is a single array
with one value for each row.
Line Map file
A line map file contains a series of polylines, each polyline is defined by the number of vertexs and a series of
coordinate pairs.
File Format
Repeat Data 1 and 2 for each polyline
Appendix 2: Files and Formats