User's guide of Proceessing Modflow 5.0

226 Processing Modflow
by using the filenames fn.xxx, where fn is the Frame File specified above and xxx is the
serial number of the frame files. Display Time is the display duration for each frame.
5. In the Animation dialog box, click OK to start the animation.
PMWIN will create a frame (image) for each time point at which the simulation results
(here: hydraulic head) are saved. When all frames are created, PMWIN will repeat the
animation indefinitely until the Esc key is pressed.
Once a sequence is created, you can playback the animation at a later time by repeating the
above steps with Create New Frames be cleared. You can also use the Animator (provided by
PMWIN) to playback the sequence.
Fig 6.5 Head distribution after 240 days of
pumping (period 1, time step 12)
6.1.1 Tutorial 1 - Unconfined Aquifer System with Recharge
Fig. 6.6 Head distribution after 120 days of
recharge (period 2, time step 6)