Service Bulletin
Service Bulletin
Service Bulletin
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
-- Page 16 of 38 ---<br />
4. Unscrew the 8 Phillips pan head machine screws M6×10 (1/2SS-3C-042) from the gear<br />
side cover (1/2SS-3C-043 or 1SS-3C-043).<br />
Figure 5<br />
5. Move the gear side cover(1/2SS-3C-043 or 1SS-3C-043) away from the hoist body.<br />
Figure 6<br />
6. Cut the cable ties that tightened wires on the gear side.<br />
Figure 7<br />
cable ties<br />
Figure 8<br />
16<br />
Phillips pan head<br />
machine screws<br />
M6×10(1/2SS-3C-042)<br />
gear side cover<br />
(1/2SS-3C-043 or<br />
1SS-3C-043).<br />
gear side cover<br />
(1/2SS-3C-102 or<br />
1SS-3C-043).
Change language