Service Bulletin
Service Bulletin
Service Bulletin
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
26. Install the new electric control assembly by the motor, making sure it is positioned<br />
correctly.<br />
Figure 36 Figure 37<br />
27. According to the new wiring diagram on page 38, reconnect all wires. Reattach cable<br />
ties where needed.<br />
Figure 38<br />
35<br />
-- Page 35 of 38 ---<br />
28. Before placing the motor side cover into the right position, put the new quick connect<br />
board (with two male quick connectors) through the hole.<br />
the hole in the<br />
motor side<br />
cover<br />
motor side<br />
cover<br />
the new electric<br />
control<br />
assembly<br />
Figure 39<br />
the new quick connect<br />
board (with two male<br />
quick connectors)
Change language