Service Bulletin
Service Bulletin
Service Bulletin
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
13. Cut the cable ties that tightened wires on the motor side.<br />
cable ties<br />
Figure 21<br />
14. According to the wiring diagram on page 38, disconnect the connections between the<br />
motor wires and the control board.<br />
the motor wires<br />
Figure 22<br />
15. Unscrew the Phillips pan head machine screw M8×16 from the motor side plate<br />
(1/2SS-3C-016 or 1SS-3C-016).<br />
Figure 23<br />
31<br />
the control<br />
board<br />
Phillips pan head<br />
machine screws<br />
M8×16<br />
-- Page 31 of 38 ---
Change language