Service Bulletin
Service Bulletin
Service Bulletin
SHOW LESS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
16. Pull the wires through the hoist body and back to the motor side.<br />
Wires were<br />
pulled<br />
Figure 24<br />
17. Unscrew the 2 Phillips pan head machine screws M6×10 (1/2SS-3C-042) from the<br />
motor side plate (1/2SS-3C-016 or 1SS-3C-016 ).<br />
Figure 25<br />
18. Remove the control board away from the hoist body. The control board can be<br />
discarded.<br />
the control board<br />
Figure 26<br />
20<br />
screws M6×10(1/2SS-3C-042)<br />
-- Page 20 of 38 ---
Change language